MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive
571.59 NewCondition OutOfStock

Sorry, but MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive is no longer available to buy.

We think you might like one of these instead:

MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive

Part #: PSA26-41328
Brand: Drytac
  • Film Finish: Clear Polyester
  • Core Size: 3"
  • Thickness: 0.5 mil
  • Hot or Cold: Hot
Qualifies for FREE Shipping!*

  • 0
  • 1

Product Description

This 41" x 328' MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The 41" x 328' MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner. Product number PSA26-41328.

Product Details

  • Roll Width: 41"
  • Roll Length: 328'
  • Core Size: 3"
  • Laminate Type: MediaTac Adhesive
  • Filmic Carrier: 0.5 mil (13 micron) clear polyester
  • Adhesive Bond: Permanent
  • Adhesive Base: High
  • Application Speed: 1' - 8' per minute
  • Application Temp: Room Temperature - 120F (49 C)
  • Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)

Product Reviews

Write Your Own Review
You're reviewing:MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive
Your Rating

Technical Data

MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.

Typical Applications
  • Developed for photo labs where a high grade of moisture stability within the mounting film is required.
  • Ideal for high-volume mounting, including pre-coating boards and image decal applications.
  • Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.

Product Structure

Adhesive Acrylic (Pressure Sensitive)
Film Clear PET
Adhesive Acrylic (Pressure Sensitive)
Release Liner 2 Side Clay Coated, 2 Side Siliconized Kraft

Physical Characteristics

Film Thickness 0.5 mil (12µ)
Adhesive Layer 1 mil (25µ) on each side
Film/Adhesive Ratio 1:0.5:1
UV Protection Factor Not Applicable
Outdoor Durability Not Applicable
Service Temperature Range -4°F to 248°F (-20°C to 120°C)
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity

Process Settings

Equipment Type Temperature Dwell Time
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Downloadable Information

Questions & Answers

Submit a New Question