MediaTac Pressure Sensitive Aqueous Adhesive
193.49
725.59
4
MediaTac Pressure Sensitive Aqueous Adhesive
- Available in multiple length/width combinations
- Ideal for mounting
- Non-slip release liner
- Can be applied at room temperature
- Ships Free Over $75
Starting At
$193.49
Choose Product Below
SWIPE FOR MORE IMAGES
- 0
- 1
| Product Name | Item Number | Price | Qty | ||
|---|---|---|---|---|---|
| MediaTac 38" x 328' Pressure Sensitive Aqueous Adhesive | PSA26-38328 | $576.69
|
|||
| MediaTac 51" x 164' Pressure Sensitive Aqueous Adhesive | PSA26-51164 | $386.29
|
|||
| MediaTac 25.5" x 164' Pressure Sensitive Aqueous Adhesive | PSA26-25164 | $193.49
|
|||
| MediaTac 51" x 328' Pressure Sensitive Aqueous Adhesive | PSA26-51328 | $725.59
|
Product Description
This MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner.
Product Details
- Roll Width: 25.5" - 51"
- Roll Length: 164' - 328"
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
- Adhesive Bond: Permanent
- Adhesive Base: High
- Application Speed: 1' - 8' per minute
- Application Temp: Room Temperature - 120F (49 C)
- Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)
Product Reviews
Write Your Own Review
Specifications
| Part Number | Roll Width | Roll Length | Film Carrier | Laminate Type |
| PSA26-25164 | 25.5" | 164' | 0.5 mil | MediaTac Adhesive |
| PSA26-38164 | 38" | 164' | 0.5 mil | MediaTac Adhesive |
| PSA26-38328 | 38" | 328' | 0.5 mil | MediaTac Adhesive |
| PSA26-41164 | 41" | 164' | 0.5 mil | MediaTac Adhesive |
| PSA26-41328 | 41" | 328' | 0.5 mil | MediaTac Adhesive |
| PSA26-51164 | 51" | 164' | 0.5 mil | MediaTac Adhesive |
| PSA26-51328 | 51" | 328' | 0.5 mil | MediaTac Adhesive |
Technical Data
MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.
Typical Applications
Product Structure
Physical Characteristics
Process Settings
Typical Applications
- Developed for photo labs where a high grade of moisture stability within the mounting film is required.
- Ideal for high-volume mounting, including pre-coating boards and image decal applications.
- Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.
Product Structure
| Adhesive | Acrylic (Pressure Sensitive) |
|---|---|
| Film | Clear PET |
| Adhesive | Acrylic (Pressure Sensitive) |
| Release Liner | 2 Side Clay Coated, 2 Side Siliconized Kraft |
Physical Characteristics
| Film Thickness | 0.5 mil (12µ) |
|---|---|
| Adhesive Layer | 1 mil (25µ) on each side |
| Film/Adhesive Ratio | 1:0.5:1 |
| UV Protection Factor | Not Applicable |
| Outdoor Durability | Not Applicable |
| Service Temperature Range | -4°F to 248°F (-20°C to 120°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
| Equipment Type | Temperature | Dwell Time |
|---|---|---|
| Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
| Press | Not recommended | |
Questions & Answers
▶
Asked by Charles Ray Miller
Thank you for your question. The adhesive can be attached to the item you want to mount, i.e. photo print and when ready to apply it to a substrate you’d peel off the liner that’s protecting the 2nd surface. You wouldn't need to attach it to something else. We have it in a size 25.5" x 15' roll, that is perfect to sample with your applications with laser/water cutter.
Answered by MyBinding
