Memorial Card Size Laminating Pouches with Short Side Slot - 100pk
21.69 25.79 3

Memorial Card Size Laminating Pouches with Short Side Slot - 100pk

Brand: MyBinding
  • Choose Thickness from 5MIL, 7MIL or 10MIL
  • Pouch sealed on longer side
  • Corners: Rounded
  • Finish: Clear
  • Ships Free Over $75
Starting At

$21.69

Choose Product Below

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
video

Product Description

Protect your memorial card for years to come by laminating it. These Memorial Card Size Laminating Pouches with Short Side Slot come in 3 thicknesses, 5mil, 7mil and 10mil depending on your need. Memorial pouches measure 2-7/8" x 4-5/8" and there are 100 per package. MyBinding offers our customers a wide selection of laminating pouches, if you are looking for that hard to find or custom size, call our customer service experts and they will be happy to help.

Product Details

  • Size: 2-7/8" x 4-5/8"
  • Thickness: 5MIL, 7MIL or 10MIL
  • Finish: Clear
  • Corners: Rounded
  • Pouch: Sealed on longer side
  • Slot Size: 1/8" x 1/2"
  • Slot Position: Short Side
  • Quantity: 100 per box

Demonstration Video

Transcript: These are Memorial Laminating Pouches! Compared to some common sizes, this memorial size is about an inch larger than a business card on both ends. It’s available in 5, 7, and 10 mil thicknesses. Generally, these sized pouches do not come in any thinner thicknesses.

Using a lamination pouch is simple:

First open your pouch and insert your project, align all the edges so they are even. Then place the pouch into the carrier so they open the same way. The edge where the two sides meet is called the crease. Line up the carrier and pouch creases. With pouch in place, slide the carrier into yo ...
Read More
These are Memorial Laminating Pouches! Compared to some common sizes, this memorial size is about an inch larger than a business card on both ends. It’s available in 5, 7, and 10 mil thicknesses. Generally, these sized pouches do not come in any thinner thicknesses. Using a lamination pouch is simple: First open your pouch and insert your project, align all the edges so they are even. Then place the pouch into the carrier so they open the same way. The edge where the two sides meet is called the crease. Line up the carrier and pouch creases. With pouch in place, slide the carrier into your pouch laminator crease end first as seen here. When it’s done, remove the carrier and unveil your beautiful new laminated project!

Questions & Answers

Submit a New Question