MHL Backmount 10mil 51" x 250' Low-Temp Paper Backer
461.99
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
MHL Backmount 10mil 51" x 250' Low-Temp Paper Backer
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
MHL Backmount 10mil 51" x 250' is an economical 10.0mil, bright white, paper-based backer/stiffener, coated with a low temp, heat-activated copolymer adhesive. For added protection, the back side (non-adhesive side) of Backmount is coated with a clear moisture barrier. As a backing / stiffening film for graphics, Backmount is engineered to add rigidity and durability, yet maintain enough flexibility to allow graphics to be rolled for transport. The true white adhesive surface will reduce "show through" while enhancing the look of the image. Backmount is ideal for applications such as POP displays, prototyping, aisle danglers and other indoor signage. Get 51" x 250' of 10mil MHL Backmount Low Temp Paper Backer with every order. Product number MBM51210.
Product Details
- Film Width: 51"
- Film Length: 250'
- Film Thickness: 10mil
- Core Size: 3"
- Base Material: 6.5mil white paper coated with a clear polypropylene moisture barrier
- Adhesive: 3.5mil (87.5 micron) white copolymer
- Initial Tack: None
- Application Speed: 1' - 6' per minute
- Application Temperature: 190 F - 240 F
- % of Light Transmission: 8.5%
- Release Liner: None
Item Specifications
- Thickness: Determine the maximum total graphic thickness the display hardware or graphic holder can accept.
- Rigidity: This attribute is determined not only by the thickness but also the type of base material. For example, a 10.0 mil polycarbonate will be more rigid than a 10.0 mil PVC (vinyl). This is especially important when graphics will be rolled for transport
- Weight: This factor is related to the first two criteria, but is not the same. Some materials may be the correct thickness and stiffness, yet are not suitable because they are too heavy. Excess weight especially affects performance and stability of graphics on banner stands or pop-up booths.
- Color: A backing material is usually visible only from the back of the graphic. However, black or white borders can be created by encapsulating an image with a specialized backing material and trimming it accordingly.
- Adhesive: It is important to consider the type of adhesive component when choosing a backing material. For example: HeatSet (heat-activated) adhesives cure very quickly, enabling you to roll images immediately, while pressure sensitive adhesive have a longer curing time during which graphics should be stored flat. Also, some aqueous based adhesives may not be suitable for outdoor use.
- Opacity: For graphics installed against a metal frame (pop up booth) choose higher opacity backing materials to eliminate show through.
