MHL Frost UV 6mil Low Temp Laminating Film
0
0
0
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
GBC 3.0 Mil Matte NAP II 25" x 250' 1" C - 3022552
$155.09
- Film Finish: Matte
- Core Size: 1"
- Thickness:3mil
- Hot or Cold: Hot
MHL Frost UV 6mil Low Temp Laminating Film
- 38",51" and 61" widths available
- 250' roll length
- Resistant to abrasion and fingerprints
- Melts as low as 190 - 220 degrees F
- Ships Free Over $75
Discontinued
Starting At
$0.00
Choose Product Below
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
MHL Frost UV 6mil is a low-glare, low-temp overlaminating film. The unique crystal-texture finish (similar to velvet Lexan) renders this film resistant to abrasion and fingerprints. It provides moderate UV protection for indoor and short term outdoor graphics.
Product Details
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
- Incorporate UV absorbers for excellent protection from damaging UV rays.
Item Specifications
- Film Width: 38" - 61"
- Film Length: 250'
- Film Thickness: 6.0mil
- Core Size: 3"
- Finish: Embossed Crystal Texture (luster)
- Base Film: 3.0mil (75 micron) embossed composite
- Adhesive: 3.0mil (75 micron) extruded polyethylene copolymer
- Initial Tack: None
- Application Speed: 1' - 6' per minute
- Application Temperature: 190 F - 220 F
- Release Liner: None
Specifications
| Part Number | Roll Width | Roll Length | Thickness | Film Finish |
| MZ38206 | 38" | 250' | 6 mil | Embossed Crystal Texture (luster) |
| MZ51206 | 51" | 250' | 6 mil | Embossed Crystal Texture (luster) |
| MZ61206 | 61" | 250' | 6 mil | Embossed Crystal Texture (luster) |
Technical Data
MHL Frost is a 6 mil (152µ) embossed composite thermal laminating film with a crystal textured finish that off ers a scratch-resistant, non-reflective surface for graphic enhancement. The finish minimizes reflectivity of bright light surroundings while allowing brilliant colors to shine through. MHL Frost incorporates ultra low melt-point technology in a textured laminating film. The film is resistant to water, oil, acid, alkali, and fingerprints. It is very durable and can be die-cut.
Typical Applications
Physical Characteristics
Typical Applications
- Recommended for display applications, especially exhibition and POS graphics.
- Ideal for pop-up display panels and roll-up banners.
- Performs well in high-traffi c areas.
Physical Characteristics
| Film Thickness | 6 mil (152µ) |
|---|---|
| Film/Adhesive Ratio | 3:3 |
| Processing Temperature | 185°F to 195°F (85°C to 91°C) |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
