0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film
$198.59 NewCondition InStock

MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film

MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film

Part #: MGD38503
Brand: Drytac
1 Questions, 1 Answers

Was: $327.92

Your Price: $198.59

You Save: 39%

Brand New Price Match Guarantee In Stock Free Shipping
Additional Sizes Below

AdditionalOptions

Product Item Number Price Qty
MHL Gloss 3mil 25" x 500' Low Temp Thermal Laminating Film Item Number : MGD25503 Price :

Was: $215.74

Your Price: $130.69

You Save: 39%

Qty :
MHL Gloss 3mil 43" x 500' Low Temp Thermal Laminating Film Item Number : MGD43503 Price :

Was: $371.02

Your Price: $224.69

You Save: 39%

Qty :
MHL Gloss 3mil 51" x 500' Low Temp Thermal Laminating Film Item Number : MGD51503 Price :

Was: $440.10

Your Price: $266.59

You Save: 39%

Qty :

ProductDescription

MHL Gloss 3mil 38" x 500' UV Low Melt films offer superior clarity and lower melting temperatures. The adhesive used is formulated to activate at temperatures as low as 190 F - 220 F. MHL Gloss UV films are ideal for encapsulation of xerographic and inkjet-bond output. While many operators prefer using 3.0 mil MHL Gloss UV on the top and a 5.0 or 10 mil film on the bottom for added rigidity, any combination of thicknesses will provide bright, punch colors and optimum clarity. Get 38" x 500' of 3mil MHL Gloss UV Low Melt film with every order. Product number MGD38503.

Product Details

  • Film Width: 38"
  • Film Length: 500'
  • Film Thickness: 3.0mil
  • Core Size: 3"
  • Finish: High Gloss
  • Base Film: 1.0mil (25 micron) polyester
  • Adhesive: 2.0 mil (25 micron) co-extruded polyethylene copolymer
  • Initial Tack: None
  • Application Speed: 1' - 10' per minute
  • Application Temperature: 190 F - 220 F
  • Release Liner: None

ItemSpecifications

  • Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
  • Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
  • Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
  • Incorporate UV absorbers for excellent protection from damaging UV rays.

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

Tips

Tips For Applying MHL UV Thermal Films:

  • Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Use your idler bar to increase the area of contact between the heated rollers and the film.
  • To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
  • MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.
Questions & Answers
Q:
AM i able to get this in a different width then listed ? ie 8 1/4" wide?
Asked by Emilia G.
A:
More than likely we can have this film cut down to whatever width that you want. However, you will most likely have to buy the full width of the next size up. There may be cutting charges for large numbers of cuts however we can sometimes get them waved if you simply want to cut a roll in half or something similar to that.

Answered by MyBinding.com 1 years and 7 months ago ago
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit