MHL Impervo UV 10mil 25" x 250' Hardcoat Laminating Film
765.59 NewCondition InStock

MHL Impervo UV 10mil 25" x 250' Hardcoat Laminating Film

Part #: MLL25210
Brand: Drytac
1 Questions, 1 Answers
  • Film Finish: Lustre
  • Core Size: 3"
  • Film Thickness: 5.0mil
  • Hot or Cold: Hot
  • Price Match Guarantee
  • Free Shipping

$765.59

Buy Now - Pay Later

From $70.82 a month

with Credit Key

Qualifies for FREE Shipping!*
SWIPE FOR MORE IMAGES
  • 0
  • 1
Product NameItem NumberPriceQty
MHL Impervo UV 10mil 38" x 250' Hardcoat Laminating FilmMLL38210
$1,163.69

Product Description

MHL Impervo UV 5mil 51" x 250' films are high-performance thermal overlaminating films offering a hardcoat, highly Release Liner: Nonescratch resistant surface. This exceptionally clear film provides moderate UV protection for indoor and short-term outdoor graphics. MHL Impervo UV is designed for the most demanding display conditions. Its protective, scratch-resistant surface is ideal for high-traffic areas, frequent handling, or where moisture is a concern. Get 51" x 250' of 5mil MHL Impervo UV Hardcoat film with every order. Product number MLL25210.

Product Details

  • Film Width: 25"
  • Film Length: 250'
  • Film Thickness: 5.0mil
  • Core Size: 3"
  • Finish: Luster / Matte
  • Base Film: 3.0mil (75 micron) polyester hardcoat
  • Adhesive: 2.0mil (50 micron) co-extruded polyethylene copolymer
  • Initial Tack: None
  • Application Speed: 1' - 6' per minute
  • Application Temperature: 190 F - 230 F
  • Release Liner: None

Product Reviews

Write Your Own Review
You're reviewing:MHL Impervo UV 10mil 25" x 250' Hardcoat Laminating Film
Your Rating

Item Specifications

  • Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
  • Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
  • Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
  • Incorporate UV absorbers for excellent protection from damaging UV rays.

Tips and Technical Data

Tips For Applying MHL UV Thermal Films:

  • Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Use your idler bar to increase the area of contact between the heated rollers and the film.
  • To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
  • MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

Technical Data


MHL Impervo is a PET thermal laminating film with a non-reflective surface, low melt-point adhesive and a UV cured hard top coat designed to off er maximum scuff and scratch resistance. It offers excellent glare reduction and aesthetic appeal under bright light conditions. The film is resistant to water, oil, acid, and alkali and can be die cut. A 5 mil (125µ) and 10 mil (254µ) version are available.

Typical Applications
  • Ideal for tradeshow graphics.
  • Performs well in high-traffic areas.
  • Suitable for POP displays that require extra durability.

Physical Characteristics

Film Thickness5 mil (125µ)10 mil (254µ)
Film/Adhesive Ratio3:27:3
Processing Temperature185°F to 195°F (85°C to 91°C)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity

Questions & Answers

Thank you for your question. UV lamination films are designed to keep the sun’s UV rays from fading ink. This feature of fade resistance gives printed outdoor signs longer life. lams made from vinyl, PET, or other materials might have a different UV spectrum. So when someone puts a UV lamp on the overlams one can see a different light spectrum that is normally invisible.

Answered by MyBinding
2 years ago

Submit a New Question