0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
MHL Lustre UV 3mil 51" x 500' Low Temp Laminating Film
$396.84 NewCondition InStock
MHL Lustre UV 3mil 51" x 500' Low Temp Laminating Film

MHL Lustre UV 3mil 51" x 500' Low Temp Laminating Film

Part #: MLD51503
0 Questions, Ask a Question
Brand: Drytac

Your Price: $396.84

Retail: $566.92

You Save: 30%

Brand New Price Match Guarantee In Stock Free Shipping
Main Features:
  • Film Finish: Lustre
  • Core Size: 3"
  • Film Thickness: 3.0mil
  • Hot or Cold: Hot
Additional Sizes Below

AdditionalOptions

Product Item Number Price Qty
MHL Lustre UV 3mil 38" x 500' Low Temp Laminating Film Item Number : MLD38503 Price :

Your Price: $295.69

Retail: $422.42

You Save: 30%

Qty :
MHL Lustre UV 3mil 43" x 500' Low Temp Laminating Film Item Number : MLD43503 Price :

Your Price: $334.60

Retail: $478.00

You Save: 30%

Qty :

ProductDescription

MHL Lustre UV 3mil 51" x 500' is a low temperature, low gloss overlaminating film that is designed to reduce glare and reflection. MHL Lustre is recommended for images viewed under direct lighting conditions. Low sheen with minimal loss of contrast of sharpness makes MHL Lustre UV particularly desirable. Its many uses include POP displays, courtroom presentations, etc. Get 51" x 500' of 3mil MHL Lustre UV Low Temperature film with every order. Product number MLD51503.

Product Details

  • Film Width: 51"
  • Film Length: 500'
  • Film Thickness: 3.0mil
  • Core Size: 3"
  • Finish: Luster
  • Base Film: 0.5mil (13 micron) polyester
  • Adhesive: 2.5 mil (62 micron) co-extruded polyethylene copolymer
  • Initial Tack: None
  • Application Speed: 1' - 10' per minute
  • Application Temperature: 190 F - 220 F
  • Release Liner: None

ItemSpecifications

  • Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
  • Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
  • Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
  • Incorporate UV absorbers for excellent protection from damaging UV rays.

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

Tips and Technical Data

Tips For Applying MHL UV Thermal Films:

  • Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Use your idler bar to increase the area of contact between the heated rollers and the film.
  • To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
  • MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

Technical Data


MHL Low Temperature Lustre is a high clarity, abrasion-resistant PET thermal laminating film with a low melt-point adhesive designed for high-speed single- and double-sided lamination. This overlaminate is specifi cally engineered with UV inhibitors to reduce image fading and protect against moisture. Its low sealing temperature preserves inks in digitally printed graphics, which can deteriorate at high temperatures. The film is resistant to water, oil, acid, and alkali and can be die cut. A 3 mil (75µ) and 5 mil (125µ) version are available.

Typical Applications
  • Engineered for large format output.
  • Increases rigidity and strength of media.
  • Preserves graphic images over time.

Physical Characteristics

Film Thickness 3 mil (75µ) 5 mil (125µ)
Film/Adhesive Ratio 0.5:2.5 2:3
Processing Temperature 185°F to 195°F (85°C to 91°C
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit