MHL Matt UV 3mil Low Temp Thermal Laminating Film
333.19 620.39 4

MHL Matt UV 3mil Low Temp Thermal Laminating Film

Brand: Drytac
  • 5 popular roll widths
  • 500' roll length
  • Eliminates reflection and glare
  • Melts as low as 190 - 220 degrees F
Starting At


Choose Product Below
  • 0
  • 1

Product Description

MHL Matt 3mil low temperature laminating film eliminates reflection and glare while hiding minor imperfections in the output. MHL Matt 3.0 mil provides moderate UV protection for indoor and short term outdoor graphics. Typical applications for MHL Matt are xerographic, offset, or inkjet bond output for viewing where there is little control over lighting conditions. This makes MHL Matt ideal for the creation of POP displays, ceiling graphics, trade show signs, etc.

Product Details

  • Film Width: 25" - 61"
  • Film Length: 500'
  • Film Thickness: 3.0mil
  • Core Size: 3"
  • Finish: Matte
  • Base Film: 0.5mil (13 micron) polyester
  • Adhesive: 2.5 mil (62 micron) co-extruded polyethylene copolymer
  • Initial Tack: None
  • Application Speed: 1' - 10' per minute
  • Application Temperature: 190 F - 220 F
  • Release Liner: None

Product Reviews

Write Your Own Review
You're reviewing:MHL Matt UV 3mil Low Temp Thermal Laminating Film
Your Rating

Item Specifications

  • Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
  • Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
  • Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
  • Incorporate UV absorbers for excellent protection from damaging UV rays.


Part NumberRoll WidthRoll LengthThicknessFilm Finish
MM2550325"500'3 milMatte
MM3850338"500'3 milMatte
MM4350343"500'3 milMatte
MM5150351"500'3 milMatte
MM6150361"500'3 milMatte

Technical Data

MHL Low Temperature Matte is a 3 mil (75µ) high clarity, abrasion-resistant PET thermal laminating film with a low melt-point adhesive designed for high-speed single- and double-sided lamination. It off ers excellent glare reduction. The film is resistant to water, oil, acid, and alkali and can be die cut.

Typical Applications
  • Ideal for tradeshow graphics.
  • Suitable for a wide variety of POP displays.

Physical Characteristics

Film Thickness3 mil (75µ)
Film/Adhesive Ratio0.5:2.5
Processing Temperature185°F to 195°F (85°C to 91°C)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity

Questions & Answers

Submit a New Question