Permacolor Gemini XT 61" x 150' Opaque White Rubber Back Mounting Film
246.91 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

Permacolor Gemini XT 61" x 150' Opaque White Rubber Back Mounting Film

Part #: PP5061L150
Brand: Mactac
  • High-tack, high-peel adhesions and high cohesive strength for quick adhesion
  • Good for low energy surfaces such as Sintra, plastic and styrene
  • White polypropylene film coated on both sides with an aggressive rubber based, pressure sensitive adhesive
  • Durability: Five years or more indoors and up to 1 year outdoors.
Additional Sizes Below
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
Product Name Item Number Price Qty
Permacolor Gemini XT 51" x 150' Opaque White Rubber Back Mounting Film PP5051L150
$285.39
Permacolor Gemini XT 54" x 400' Opaque White Rubber Back Mounting Film PP5054L400
$805.59
Permacolor Gemini XT 54" x 150' Opaque White Rubber Back Mounting Film PP5054L150
$302.59
Permacolor Gemini XT 51" x 400' Opaque White Rubber Back Mounting Film PP5051L400
$760.89

Product Description

This Permacolor Gemini XT 61" x 150' Opaque White Rubber Back Mounting Film is an economical, general purpose, high-bond rubber-based adhesive mounting film with an opaque white PET carrier. A moisture stable, polycoated kraft liner protects the adhesive. The single release liner permits easy lamination and eliminates the need to remove a second liner in applications where that may be difficult or impossible. This Permacolor Gemini XT 61" x 150' Opaque White Rubber Back Mounting Film is designed for quick adhesion to a variety of mounting surfaces and can be used in both indoor and outdoor applications.

Product Details

  • Features and Benefits:
    • High-tack, high-peel adhesions and high cohesive strength for quick adhesion
    • Good for low energy surfaces such as Sintra, plastic and styrene

  • Typical Uses:
    • General purpose mounting of digital images
    • Roll laminators

  • Physical Properties

    Property Typical Values Test Method
    Thickness, inches (µm)
    Carrier plus adhesive

    0.005 (127)
    ASTM-D645
    Quick Tack lb. /in² (N/25mm)
    Stainless Steel
    9.0 (39) MACtac CTM-25
    Peel Adhesion lb./in. (N/25 mm)
    30 min. applied

    Stainless Steel
    Acrylic panels
    Sintra board
    Digital film
    Digital Paper


    11 (50)
    12 (45)
    4.5 (19)
    6.3 (28)
    5.3 (24)
    ASTM D 903-49
    Shear, Hours to Fail
    Stainless Steel
    600+ FTM -8
    1" x 1" x 1000g
    Temperature Ranges
    Application for best results:
    End Use:

    > 50°F
    -20° to 195°F (-30° to 90°C)
    Adhesive pH Neutral TAPPI-529

  • Durability
    Five years or more indoors and up to 1 year outdoors. Please note that exposure to severe temperatures, ultra-violet light and also in tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.

  • Shelf Life
    Two years when stored at 68°F (20°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.

  • Limitations
    1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
    2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
    3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.

  • Recommendations
    • 1. Where exposure to chemicals, solvents or high pressure wash is anticipated, Mactac recommends sealing the edges with varnish, silicone or other sealant to prevent penetration by these liquids.
    • 2. Prints should not be applied onto dusty, dirty, oily or oxidized surfaces.
    • 3. The mounting board must be properly prepared prior to mounting the image. This may include wiping with alcohol, light sanding or surface sealing depending on the board. Contact your board supplier for their recommendation.
    • 4. Mactac's pressure sensitive mounting films are intended for "Cold Roll Lamination" (50°F - 120°F). The addition of heat while simultaneous mounting with Thermal Overlaminates may result in curl or have other detrimental effects on the finished product.
    • 5. PP5000 is not designed with 2nd surface mounting (face mounted applications) in mind.
    • 6. Whenever possible, always test first to ensure end-use capability.

    • Product reinforced with 2-mil polyester during adhesion testing.
    • Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values

Item Specifications

  • Adhesive Category: Permanent/Permanent Rubber
  • Carrier: Polypropylene (PP)
  • Color: White
  • Films: Polypropylene (PP)
  • Length: 150'
  • Width: 61"
  • Liner Category: 60# Poly-Coated
  • Outdoor Durability: 1 Year
  • Precise Program: N
  • Thickness: 0.9 mil

Questions & Answers

Submit a New Question