Permacolor PermaFlex FloorGrip PF6600 6mil 54" x 150' Clear PVC Textured Overlaminate

Product Details

• Features and Benefits:
  • Meets ANSI/NFSI B101.3 Standard for Slip Resistance
  • Compatible with all digital ink jet and UV inks
  • UV inhibitors protect image from color fade
  • Protects from abrasion and moisture
  • Floors: outdoor durability is three months and indoor is 1 - 3 years depending on traffic
  • Short-term applications
• Typical Uses:
  • Floor graphics
• Use with: StreetRap - pg 16 / REBEL


• Physical Properties
  

  Property	Typical Values	Test Method
  Thickness, inches (µm) Film plus adhesive	0.007 (180)	ASTM-D645
  Quick Tack, lb./in² (N/25mm) Glass	3.2 (14)	FTM-9
  Peel Adhesion lb./in. (N/25mm) 180° on Glass - 20 min - 24 hrs.	3.2 (14) 4.6 (20)	FTM-1
  Dimensional Stability % MD CD	< 0.2 < 0.2	FTM-14
  Temperature Range Application: End Use:	Above 45°F (16°C) -20° to 150°F (-28° to 66°C)
  Surface Burning Characteristics Meets ANSI, NFPA, and IFC Flame Spread Smoke Density EU Flammability	Class B 40 75 Self-Extinguishing	ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 ISO 3795
  Adhesive pH	Neutral	TAPPI-529
  Slip Resistance US - Wet DCOF (Phase I) Wet SCOF (Phase II) EU- Slip Resistance - German Ramp BS- Slip Resistance (µm) Pendulum RA Dry RA Wet	0.48 Pass 0.60 High Traction R11 Manageable 49 Low slip potential 32 Moderate slip potential	ANSI/NFSI B101.3 ANSI/NFSI B101.1 DIN 51130 BS 7976-2

• Durability
  In vertical applications (90±5°): the outdoor durability is 3 years and indoor durability is 5 years. On floors: the outdoor durability is 3 months and indoor is 1 – 3 years depending on traffic.
  
  This information is based on successful real life experience and testing in a laboratory Weather-Ometer according to ISO 4892-3.
  
  

  Note: Exposure to severe temperatures, ultra-violet light as well as conditions in Southern United States, tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.

  
  
  All Permacolor overlaminating films have UV resistance built in to help extend the life of your image, the durability of the image is mainly dependent upon the quality of the inks (see technical data sheets given by the ink manufacturers) and pressure sensitive media being used.
• Shelf Life
  Two years when stored between 60°F - 77°F (15°C - 25°C) and at 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
• Limitations
  1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
  2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
  3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
  
• Recommendations
  
  • Mactac studies and field surveys with numerous customers using Permacolor laminates in rolled-up graphic applications, leads to the following recommendations for rolling and shipping laminated images:
  • 1. Prior to rolling graphics:
    • a) A 2 - 4 hour wet-out period is strongly recommended for the adhesive system to build to ultimate adhesion. This will significantly improve your success with rolled-up graphics.
    • b) This product can be used over UV inkjet and screen printed images. However, extra wet-out time is required to reduce silvering and build bond prior to rolling.
  • 2. For single-side laminated images:
    • a) Roll laminated side in for shipping and storage.
    • b) An inside roll diameter of 3 - 5 inches, minimum, is recommended for graphics with less than 10 mil total graphic thickness (includes imaged media and Permacolor overlaminates).
    • c) For images with a total thickness of 10 mils or greater an inside roll diameter of 10 - 12 inches, minimum, is recommended.
  • 3. For images laminated on both front and back sides:
    • a) Roll images with the thicker laminate to the inside for shipping and storage. For example: if your image has 5 or 10 mil polycarbonate or vinyl on the front and 15 mil Polycarbonate on the back (for additional stiffness), roll the graphic with the 15 mil PermaFlex side in.
    • b) All double laminated images should be rolled with an inside roll diameter of 10 - 12 inches minimum. Remember that a larger inside diameter is better.
    • Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values.

• Adhesive Type Permanent: Permanent Acrylic
• Color: Clear
• Films: Vinyl (PVC)
• Finish: Textured
• Length: 150'
• Width: 54"
• Liner Category: 83# White Kraft
• Outdoor Durability: 3 Years
• Precise Program: N
• Thickness: 6.0 mil