0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Permacolor PermaGard SAG 6.9mil Clear Anti-Graffiti / Window Protection Overlaminates
$452.99
Permacolor PermaGard SAG 6.9mil Clear Anti-Graffiti / Window Protection Overlaminates

Permacolor PermaGard SAG 6.9mil Clear Anti-Graffiti / Window Protection Overlaminates

Brand: Mactac
0 Questions, Ask a Question
  • Developed to protect graphic images, private or public transport vehicles and areas that require a graffiti protection.
  • Increase the impact resistance of windows
  • Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
  • Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
Starting At

Your Price: $452.99

Choose Product Below

ProductDescription

These Mactac Permacolor PermaGard SAG Clear Anti-Graffiti and Window Protection Overlaminate are 6.9 mil hard coated, high gloss and ultra-clear, durable polyester face with excellent graffiti, UV and abrasion resistance. It has an optically clear, acrylic, pressure sensitive adhesiveb protected by a 1.4 mil smooth PET film release liner. It is engineered to protect your images and windows from vandalism and add an additional layer of safety from flying glass shards in case of breakage. These films can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, waterbased and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments. It meets ANSI Z26.1 for use in private or public transport vehicles and areas (trains, subways, tramways, buses...) that require graffiti and window protection. These overlaminate can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces. Plus, these films have superior solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners without damaging the graphic.

Product Details

  • Features and Benefits:
    • Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
    • Increase the impact resistance of windows
    • Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
    • Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
    • Wets out over UV ink jet prints
    • UV Protection built in
  • Typical Uses:
    • Private and public transportation vehicles
    • Signage
  • Use with:IMAGin Series, REBEL Series

  • Physical Properties
    Property Typical Values Test Method
    Thickness, inches (µm)
    Film plus adhesive

    0.0079 (200)
    ASTM D2103
    (ISO 536)
    Peel Adhesion
    lb./in. (N/25mm)

    Stainless Steel
    - 20 min
    - 24 hr.



    3.6 (16)
    4.5 (20)
    PSTC – 101
    (FTM-1)
    Quick Tack, lb./in² (N/25mm)
    Stainless Steel

    2.5 (11)
    FTM 9
    (MACtac CTM-25)
    Dimensional Stability, (%)
    MD
    CD

    < 0.2
    < 0.2
    FTM 14
    (Mactac CTM-2) (Method D)
    48 hours @ 158°F (70°C)
    Bonded to aluminum
    Shear, Hours to fail
    Stainless Steel – 2.2 lbs. @
    72°F (22°C)
    150 PSTC - 7
    Temperature Range
    Application:
    End Use:

    50° to 104°F (10° to 40°C)
    -40° to 194°F (-40° to 90°C)
    Adhesive pH Neutral TAPP-529
    Face Tensile Strength (K/psi)
    Elongation @ Break (%)
    28
    160
    ASTM D-882A
    Resistance to Temperature
    Change:
    No cracking, delamination,
    clouding or deterioration
    ANSI Z26.1 Test #22
    Luminous Transmittance: - 87.7% ANSI Z26.1 Test #2
    Abrasion Resistance:
    500g/wheel, 100 cycles’
    w/SC10Fwheel
    % change: 3.4 ANSI Z26.1 test 17
    (ASTM D1003)
    Light Stability (UV
    Resistance):
    After 1600 hours
    loss of light transmittance:
    1.1% ANSI Z26.1 test 24 - ref. test
    5.11 ISO 4892-2
    (spec. < 5% change)
    Flammability:
    Smoke Emission:
    Flame index = 5
    Flaming mode non-flaming mode
    1.5min. 4 1
    4.0 min 48 2
    Optical Density 138 92
    ASTM E162-13
    ASTM E662-13c
    Humidity Test: No evidence of either material
    separation or spots.
    ANSI Z26.1 Test #3
    Bombardier Toxic Gas: Flame index = 5
      Flaming mode non-flaming mode
    CO max 690 121
    CO2 max 11023 410
    NO2 <1 <1
    SO2 <1 <1
    HCl 35 31
    HF 2 <2
    HBr <1 <1
    HCN <1 <1
    SMP800c Rev. 6 (ppm)
  • Durability
    The durability of the film is up to 2 years outdoors and 5 years indoor. While all PERMACOLOR overlaminating films have UV resistance built in to help extend the life of your image, the durability of the image is mainly dependent upon the quality of the inks (see technical data sheets given by the ink manufacturers) and pressure sensitive media being used.
  • Shelf Life
    Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
  • Chemical Resistance
    Resistant to non-abrasive soaps, denatured alcohol, water, detergents and most diluted acids and alkalis. It is not affected by short term contact with most of aliphatic and aromatic hydrocarbons, ketones, esters, chlorinated hydrocarbons and alcohol
  • Limitations
    1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
    2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
    3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
  • Recommendations
    • Where exposure to moisture, chemicals, solvents or high pressure wash is anticipated, Mactac recommends sealing the edges with varnish, silicone or other sealant to prevent penetration by these liquids.
    • The addition of heat while simultaneous mounting with Thermal Overlaminates may result in curl or have other detrimental effects on the finished product.
    • Whenever possible, always test first to ensure end-use capability.
  • Processing:
    • LAMINATION:
      • Mactac recommends laminating SAG 53 to your printed graphics with a professional laminator. Overlaminates should not be applied onto dusty or dirty prints.
      • Mactac's pressure sensitive mounting films are intended for "Cold Roll Lamination" (40°F - 104°F).
    • APPLICATION:
      • Wet application method is recommended when used as a window protection film. We recommend using professional window application squeegees for a perfect application. Ref: TA2111 for proper installation instructions!
    • MAINTENANCE & CLEANING:
      • SAG films can be easily cleaned off using most commercially available window cleaners or and graffiti removing cleaners without damaging the graphic.
  • Values given are typical and are not necessarily for use in specification.

ItemSpecifications

  • Adhesive Category: Optically Clear
  • Adhesive Type: Permanent Acrylic
  • Color: Optically Clear
  • Films: Hard Coated Polyester (PET)
  • Finish: Hard Coated High Gloss
  • Length: 82'
  • Width: Choose Above
  • Liner Category: 1.5 mil Clear Polyester (PET)
  • Outdoor Durability: 2 Years
  • Precise Program: N
  • Thickness: 6.9 mil

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit