Plastic Comb Die Set For Rhin-O-Tuff HD7700
1338.00 NewCondition InStock

Plastic Comb Die Set For Rhin-O-Tuff HD7700

Part #: 79050
Brand: Rhin-O-Tuff
  • Plastic Comb Binding Die
  • 9/16" Hole Spacing
  • .125 x .312 Hole Size
  • Disengageable Dies: Yes
  • Price Match Guarantee
  • Free Shipping

$1,338.00

Buy Now, Pay Later
Starting at $124/month
Learn More >

Qualifies for FREE Shipping!*

SWIPE FOR MORE IMAGES
  • 0
  • 1
video
Product Name Item Number Price Qty
2.5:1 .250 Round Hole Die Set For Rhin-O-Tuff HD7700 79500
$1,183.00
3:1 Round Hole Die Set For Rhin-O-Tuff HD7700 79080
$1,183.00
4:1 .2475 Round Hole Spiral Plastic Coil Die Set For Rhin-O-Tuff HD7700 - 079150 79150
$1,183.00
4:1 .250 Round Hole Die Set For Rhin-O-Tuff HD7700 79060
$1,183.00
4:1 .250 Oval Hole Die Set For Rhin-O-Tuff HD7700 79450
$1,389.00
4:1 .248 Round Hole Die Set For Rhin-O-Tuff HD7700 79020
$1,183.00
4:1 .2475 Oval Hole Die Set For Rhin-O-Tuff HD7700 79440
$1,389.00
5mm Round Hole Die Set For Rhin-O-Tuff HD7700 79110
$1,183.00
6mm Round Hole Die Set For Rhin-O-Tuff HD7700 79090
$1,183.00
6mm .2362 Oval Hole Die Set For Rhin-O-Tuff HD7700 79460
$1,389.00
2:1 Round Hole Die Set For Rhin-O-Tuff HD7700 79100
$1,183.00
2:1 Rectangle Die Set For Rhin-O-Tuff HD7700 79040
$1,338.00
2:1 Square Hole Die Set For Rhin-O-Tuff HD7700 79120
$1,338.00
3:1 Square Hole Die Set For Rhin-O-Tuff HD7700 79070
$1,338.00
3:1 Square Pro-Click GBC .1875 x .1875 Die Set For Rhin-O-Tuff HD7700 79480
$1,338.00
3 Hole Round Die Set For Rhin-O-Tuff HD7700 79420
$1,183.00
Velobind Die Set For Rhin-O-Tuff HD7700 79030
$1,183.00
5:1 Round, .200 Pitch Die for HD7700 771720
$1,183.00
Disc Binding Die for Rhin-O-Tuff ONYX HD7700 / 7700H 04HD77110799
$1,389.00
3:1 Round Die Set W/ Thumbcut For Rhin-O-Tuff HD6500 and HD7000 000908T
$1,183.00
3-5-7 Round Hole 5/16 Die Set For Rhin-O-Tuff HD6500 and HD7000 943
$1,183.00
Rhin-O-Tuff Onyx APES-14 Automatic Paper Ejector and Stacker APES14-ONYX
$3,799.00
Rhin-O-Tuff Onyx PAL-14 Piks-A-Lift Electric Paper Separator PAL-14-ONYX
$2,799.00
Rhin-O-Tuff Onyx PAL-M Piks-A-Lift Manual Paper Lifter PAL-M-ONYX
$959.00
Rhin-O-Tuff Mounting Kit for HD Punches MK7000-ONYX
$120.00
Rhin-O-Tuff Versa Switch for HD7700 Vertical 77890
$185.00
Rhin-O-Tuff Palm Switch for HD7000/7700 Punch 77770
$135.00

Product Description

MyBinding.com carries the full line of Rhin-O-Tuff products including their line of heavy duty punches and all of the diesets used in these punches. This dieset is designed for use in the Rhin-O-Tuff HD7700 Ultima and Rhin-O-Tuff HD7700 Horizontal punch and in conjunction with the RAF11 automatic punch. The Ultima7700 is the heaviest duty punch available on the market and can consistently punch up to 50 sheets of 20# bond Paper and utilizes Rhino Tuff's patented Quick Change Die System. This die is 14" in length and is open ended to facilitate the punching of longer documents.

Product Details

  • Plastic Comb Binding Die
  • 9/16" Hole Spacing
  • .125 x .312 Hole Size
  • Rhin-O-Tuff Part Number: 079050

Item Specifications

  • Actual Machine Dimensions: 18x3x3
  • Actual Machine Weight : 10
  • Shipping Length : 24
  • Shipping Width: 4
  • Shipping Height: 4
  • Shipping (Web) Weight: 15 lbs

Demonstration Video

Transcript: Welcome to MyBinding video. This is the demo and assembly of the Onyx HD7700. This heavy duty tabletop punch is the top of the line punch solution for all your binding needs. Before we get to the assembly, let's watch a demonstration to see just how this machine works. First you'll need to set the paper stop according to your project's needs. Twist the dial on the left side of the machine to fine tune to get it exactly on the line that you need. With that all set, run a test paper. Slide it into the throat of the machine, all the way to the left, press down on the Palm switch or the foot pedal ... Read More

Welcome to MyBinding video. This is the demo and assembly of the Onyx HD7700. This heavy duty tabletop punch is the top of the line punch solution for all your binding needs. Before we get to the assembly, let's watch a demonstration to see just how this machine works. First you'll need to set the paper stop according to your project's needs. Twist the dial on the left side of the machine to fine tune to get it exactly on the line that you need. With that all set, run a test paper. Slide it into the throat of the machine, all the way to the left, press down on the Palm switch or the foot pedal. A handy test at this point is to fold the paper in half, line up the corners, and see if the holes all line up. It should be centered with no half or missed holes. The solution to half holes is to remove a pin. All the pins are disengageable on the Rhin-O-Tuff die. Pull the die out, find out which pin it is that you need to remove, open the carriage, remove the pin, replace the carriage, and you're all set. Pin removal is the same for all Rhin-O-Tuff dies. It's very simple, it's very quick. Lock your die back into place and let's punch again and we'll see how we're doing. This one looks perfect. Do the fold test again and everything looks great. It's time to begin.

With your project all in order in the way you'd like it to be, process through your whole project, pack by pack of up to 55 sheets in a single punch. All Rhin-O-Tuff punches come with the patented auto-reverse feature, keeping paper jams a thing of the past. However, it can happen if just too many sheets are put in at the same time. Stored on the back side of the machine is a small handle. This goes in on the left-hand side of the machine right into the groove; turning it counter clockwise will reverse the pins on the machine, then you can remove your paper. If you need to, you can peer down just to the left side of the paper stop and you can actually watch the pins retract to make sure they are all gone so you can remove your paper. The chip tray in the front is transparent so you can keep an eye on just how many chips are building up.

That's the demonstration and how-to. And now for the assembly. Once you've removed your machine from the box, place it on a sturdy table and remove the plastic coating that protects the transparent cover of the chip tray. Inside the chip tray, you'll find all the parts of assembly that you'll need. There's oil for lubrication, two handles to lock and unlock the die, a power cord, a Palm switch, as well as the foot pedal.

The first step is to install the two handles. Remove from the bag and place them on either side. Screw them tight all the way down. These will service the lock and unlocking of the punched dies. The Onyx HD7700 comes with a foot pedal that plugs into the back of the machine and activates the punch. Also included with this machine is the Palm switch; some prefer it to the foot pedal. It plugs into the same place on the back of the machine and is activated either by finger or by palm. If you have purchased the optional Versa switch, now would be a good time to install it. Simply remove the knob from the paper stop and take the stop itself off. Then replace it with the Versa switch and screw the same knob back down. This switch plugs into the back of the machine in the same spot for the foot pedal or the Palm switch.

For the Onyx HD7700, the dies go in on the right-hand side. Place them in, slide it all the way until the black part is flush with the machine. And then lock both handles on the right and left. There you go, you're all set. That's the demo and assembly of the Onyx HD7700. You're on your way to a great many books. For more demos, reviews, and how-tos, check out MyBinding.com.

Transcript: Welcome to MyBinding video. Let's take a look at the features and uniqueness of the Onyx HD7700. This is the top of the line single-punch solution for all your binding needs. Heavy duty and comes with an industry-leading three-year warranty. It's all shipped together with one box and with the Onyx HD7700, you get the Palm switch as well as a foot pedal. Some users prefer the hands-free of the foot pedal and some would rather use the hand they're holding the paper with.
One of the greatest features of all Rhin-O-Tuff Onyx punches is the interchangeable die system. Rhin-O-Tuff has created more ...
Read More

Welcome to MyBinding video. Let's take a look at the features and uniqueness of the Onyx HD7700. This is the top of the line single-punch solution for all your binding needs. Heavy duty and comes with an industry-leading three-year warranty. It's all shipped together with one box and with the Onyx HD7700, you get the Palm switch as well as a foot pedal. Some users prefer the hands-free of the foot pedal and some would rather use the hand they're holding the paper with.

One of the greatest features of all Rhin-O-Tuff Onyx punches is the interchangeable die system. Rhin-O-Tuff has created more than 20 interchangeable dies that fit in this machine alone. And they slide in and out just like you so. So whatever bind, punch pattern, or look you're going for for your business, this can be one machine that handles all of your needs. Each die is priced separately, and there are dies for plastic comb, wire loop, plastic coil, VeloBind, and three-hole loose leaf. It's an impressive looking machine and the chip tray in the front is transparent so you can see right in to see how things are filling up. The punch capacity is rated up to 55 sheets or 110 pages of 20lb paper. You can also punch up to five plastic mylar sheets, regardless of the whole pack. And as with all Rhin-O-Tuff Onyx punches, the unique auto-reverse feature is in play.

As you work, a new overload detection feature triggers an auto-reversing function to reduce jamming in the punch. Perfect and consistent punching is what you need for your business. With this machine's paper stop system, it dials in exactly what you need according to the size paper you're using and with this dial, you can even fine tune your settings so you can set it, forget it, and run your whole project without fear. If you want confidence in excellent punching, the Rhin-O-Tuff Onyx HD7700 is a great bet.

For more demos, reviews, and how-tos, check out MyBinding.com.

Transcript: Welcome to MyBinding video. In this how-to video, we'll learn just how to change a die on an Onyx HD7700 punch. It's as simple as that. First off, the turn the power off in the back. From both sides, unlock the die by simply bringing down these two levers and remove the die by sliding it directly out until it's completely out of the carriage. Make your selection from the many interchangeable dies that Rhin-O-Tuff has created for this system and others, and with the pins facing away from you, slide it back into the machine just the way you took the other one out. Slide it all the way to the bla ... Read More

Welcome to MyBinding video. In this how-to video, we'll learn just how to change a die on an Onyx HD7700 punch. It's as simple as that. First off, the turn the power off in the back. From both sides, unlock the die by simply bringing down these two levers and remove the die by sliding it directly out until it's completely out of the carriage. Make your selection from the many interchangeable dies that Rhin-O-Tuff has created for this system and others, and with the pins facing away from you, slide it back into the machine just the way you took the other one out. Slide it all the way to the black part as flush with the side of the machine and lock it up both sides. And that's easy die-changing on the Onyx HD7700. For more demos, reviews and how-tos, check out MyBinding.com.

Questions & Answers

Submit a New Question

Get Code