SpotOn Floor 200 White Matte Self-Adhesive Embosssed Printable Vinyl
- Printable slip-resistant PVC film
- Compatible with UV and latex printers
- White matte textured finish
- Utilizes a unique dot patterned removable adhesive
- Ships Free Over $75
Starting At
$150.39
Choose Product Below
SWIPE FOR MORE IMAGES
- 0
- 1
Product Name | Item Number | Price | Qty | ||
---|---|---|---|---|---|
SpotOn Floor 200 White Matte 25.5" x 10' Self-Adhesive Embosssed Printable Vinyl | SPOW25010 | $150.39
|
|||
SpotOn Floor 200 White Matte 54" x 98' Self-Adhesive Embosssed Printable Vinyl | SPOW54098 | $503.09
|
Product Description
These SpotOn Floor 200 Self-Adhesive Printable Vinyl are 8 mil (200µ) embossed printable white matte monomeric PVC film, coated on one side with a dot-patterned, removable pressure sensitive polyacrylate adhesive. The adhesive are protected by a single sided, siliconised clay coated kraft release liner. This high quality ink receptive embossed white vinyl was specifically developed for easy application. SpotOn Floor 200 has a post-printed anti-slip rating of R10, according to DIN 51130:2010, which allows for vibrant, slip resistant floor graphics without the need for lamination. Perfect for short-term indoor floor applications where graphics are applied to floor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo. These SpotOn Floor 200 White Matte Self-Adhesive Embosssed Printable Vinyl are compatible with (Eco) Solvent, Latex and UV printers.
Product Details
- Printable slip-resistant PVC film
- Utilizes a unique dot patterned removable adhesive
- White matte textured finish
- Compatible with UV and latex printers
Features:
- Easy, bubble-free graphic application and removal
- Anit-slip properties make it suitable for floor graphics
- No tools required for installation
- No overlamination needed
- Ideal for indoor floor graphic applications
- Low Slip Potential Rating according to EN 13036-4
Benefits:
Item Specifications
- Size: Choose Above
- Film: 200µ White Matte Monomeric PVC
- Adhesive: Dot Pattern Removable Polyacrylate
- Release Liner: 135 gsm Siliconized 1 Side Bleached Clay Coated Kraft
- Film Thickness: 8 mil (200µ)
- Adhesive Layer: 0.6 mil (15µ)
- Film/Adhesive Ratio: 8.0:0.6
- UV Protection Factor: Not Applicable
- Outdoor Durability: Internal Use Only
- Application Temperature: >41°F (5°C)
- Service Temperature Range: -4°F to 149°F (-20°C to 65°C)
- Slip Rating (Post-Printed): R10 (According to DIN 51130:2010)
- Shelf Life: 1 year
- Storage Conditions: 64°F to 77°F (18°C to 25°C); 40 - 65% Relative Humidity
Technical Data
SpotOn Floor 200 is an 8 mil (200µ) embossed printable white matte monomeric PVC film, coated on one side with a dot-patterned, removable pressure sensitive polyacrylate adhesive. The adhesive is protected by a single sided, siliconised clay coated kraft release liner. This high quality ink receptive embossed white vinyl was specifically developed for easy application. SpotOn® Floor 200 has a post-printed anti-slip rating of R10, according to DIN
51130:2010, which allows for vibrant, slip resistant floor graphics without the need for lamination.
Typical Applications
Print Compatibility
Product Structure
Physical Characteristics
Installation Recommendations
Please see SpotOn installation instructions for further details. The surface must be clean and smooth and free of defects before application.
Typical Applications
- Ideal for short-term indoor floor applications where graphics are applied to floor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo.
- Graphics for floor advertising as well as other promotional applications.
- Excellent for applications where easy, tool-free installation is necessary.
- Can be removed within 6 months of initial installation.
Print Compatibility
- (Eco) Solvent
- Latex
- UV
Product Structure
Film | 200µ White Matte Monomeric PVC |
---|---|
Adhesive | Dot Pattern Removable Polyacrylate |
Release Liner | 135 gsm Siliconized 1 Side Bleached Clay Coated Kraft |
Physical Characteristics
Film Thickness | 8 mil (200µ) |
---|---|
Release Liner Layer | 0.6 mil (15µ) |
Film/Release Liner Ratio | 8.0:0.6 |
UV Protection Factor | Not Applicable |
Outdoor Durability | Internal Use Only |
Application Temperature | >41°F (5°C) |
Service Temperature Range | 4°F to 149°F (-20°C to 65°C) |
Slip Rating (Post-Printed) | R10 (According to DIN 51130:2010) |
Shelf Life | 1 year |
Storage Conditions | 64°F to 77°F (18°C to 25°C); 40 - 65% Relative Humidity |
Installation Recommendations
Please see SpotOn installation instructions for further details. The surface must be clean and smooth and free of defects before application.