Registration Card Size Laminating Pouches with Short Side Slot - 100pk
36.69 36.69 1

Registration Card Size Laminating Pouches with Short Side Slot - 100pk

Brand: MyBinding
  • Choose Thickness from 3MIL or 10MIL
  • Pouch sealed on longer side
  • Corners: Rounded
  • Finish: Clear
Starting At

$36.69

Choose Product Below
SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
video

Product Description

Whether it is for your customer files or an event, wear and tear can reek havoc on contact information that you know your going to need again, so protect it with lamination. Registration Card Size Laminating Pouches with Short Side Slot provide brilliant color and superior protection along with a professional finish. There are 2 thicknesses available, 3mil and 10mil depending on your preference. Registration pouches measure 3-1/2" x 9" and there are 100 per package.

Product Details

  • Size: 3-1/2" x 9"
  • Thickness: 3MIL or 10MIL
  • Finish: Clear
  • Corners: Rounded
  • Pouch: Sealed on longer side
  • Slot Size: 1/8" x 1/2"
  • Slot Position: Short Side
  • Quantity: 100 per box

Product Reviews

Write Your Own Review
You're reviewing:Registration Card Size Laminating Pouches with Short Side Slot - 100pk
Your Rating

Demonstration Video

Transcript: These are Registration Laminating Pouches! Compared to some common sizes, this registration size is slightly smaller than your standard photo, but slightly longer than a half sheet of paper. It’s available in 3, 5, 7, and 10 mil thicknesses.

Using a lamination pouch is simple:

First open your pouch and insert your project, align all the edges so they are even. Then place the pouch into the carrier so they open the same way. The edge where the two sides meet is called the crease. Line up the carrier and pouch crease. With pouch in place, slide the carrier into your pouch laminator crease ...
Read More
These are Registration Laminating Pouches! Compared to some common sizes, this registration size is slightly smaller than your standard photo, but slightly longer than a half sheet of paper. It’s available in 3, 5, 7, and 10 mil thicknesses.Using a lamination pouch is simple:First open your pouch and insert your project, align all the edges so they are even. Then place the pouch into the carrier so they open the same way. The edge where the two sides meet is called the crease. Line up the carrier and pouch crease. With pouch in place, slide the carrier into your pouch laminator crease end first as seen here. When it’s done, remove the carrier and unveil your beautiful new laminated project!

Questions & Answers

Submit a New Question