Sorry, but Renz Eco C 360 2:1 Pitch Wire Binding Machine is no longer available to buy.
We think you might like one of these instead:
Renz Eco C 360 2:1 Pitch Wire Binding Machine
- Binds up to 340 sheets
- Closure control guarantees easy ring wire closure for perfect presentations every time
- Special hardened punch pins for long lasting life Staggered punching pins for better punching
- For paper formats: A5, A4
- Adjustable side lay for perfect punching registration
- Easy to empty sliding waste tray
- Measures the document or ring wire size
- Heavy duty construction & compact design
|Punching capacity sheets per hr||12,000|
|Min. punching width||10 mm|
|Max. punching width||300 mm|
|Min. unpunched length||50 mm|
|Max. unpunched length||500 mm|
|Max. punching thickness||2.5 mm|
|Punch dies available||Oblong 5.5 x 3.5 mm|
|Selectable punch pins (QSA)||No|
|Variable margin depth||No|
|Binding thickness||1 - 34 mm|
|Min. binding width||10 mm|
|Max. binding width||360 mm|
|No. of books output per hr||200|
|Machine dimensions L x W x H||330 x 560 x 180 mm|
Introducing the ECO C 360 from Renz.
The ECO C 360 is the compact, entry-level 2:1 Pitch Model for manual punching and ring wire binding for all formats up to A4. A very simple operation thanks to the ergonomic two lever system giving you the ability to bind wires ranging from 1/4 inch to 1 1/2. As a machine to the 2:1 pitch range, the ECO C 360 allows you to benefit from 2:1 binding on your smaller documents, a feature that is completely unique to Renz.
Simply measure your document to determine the wire diameter then move the back cover of your document to the front and set aside. You are now ready to punch and load your document on the wire. Select the appropriate wire size and drop this on the machine fingers ready for loading. Select the corresponding size on the closing device with a half turn, slide and a half turn to lock off and set the document size to A4 or A5 by adjusting the side lay. Place the document into the punching throat, move to the right and pull the large lever down to punch your document. Pull your document out of the punching throat and position over the wire. Now place the wire document under the closing bar ensuring the wires are upright and flush against the back of the recess. Pull the small lever all the way down gently and release and your document is now bound and finished.
Remember to empty the tray located at the front of the machine. Logical and cost effective binding with the ECO C 360 from Renz.