SealerSales KF-150CSTA Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller
164.39
NewCondition
InStock
SealerSales KF-150CSTA Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Product Description
This SealerSales KF-150CSTA Portable PTFE Coated 6" Direct Heat Sealer with Temperature Controller and 15mm Seal Width is ideal for sealing cellophane, coated aluminum foil, kraft paper, and other thicker materials. It is portable and lightweight that can be used anywhere. This sealer is constructed with a high impact ABS thermal casting for heavy applications. This SealerSales KF-150CSTA seals polyethylene and polypropylene up to 6 mil thick and 6" wide with a 5-15 minute warm up time. Also available without temperature controller.
Product Details
- 6" Direct Heat Sealer.
- Ideal for sealing cellophane, coated aluminum foil, Kraft paper, and other thicker materials.
- Two PTFE coated, serrated jaws.
- Seal Width - 5/8" or 15mm.
- Adjustable temperature controller for wider range of settings.
- Easy to operate:
Depending on the material, allow 5-15 minutes of warm up time for the sealer to reach the desired temperature. Just insert the material between the jaws and close the jaws for a few seconds. Release the jaw. Increase or decrease the timing until a satisfactory seal is obtained.
Item Specifications
- Power Supply: 110V-120V
- Watts: 50W
- Seal Length: 6"
- Seal Width: 5/8" / 15mm"
- Power Cord: 7ft
- Dimensions (L x W x H): 6 1/2" x 7" 3 1/4"
- Weight: 4LBS
Demonstration Video
KF-150CST Portable Direct Heat Sealers
Resources
Questions & Answers
Unfortunately, the SealerSales KF-150CSTA Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller will not seal an MDPE tube.
Answered by MyBinding.com
