SealerSales Replacement Kit for FS-200C Hand Impulse Sealer
8.67
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
SealerSales Replacement Kit for TISA-452 Automatic Impulse Sealer
$24.09
- Kit Includes: (2) 2mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 18" TISA Series Automatic Impulse Sealer w/ 2mm Seal Width
- Quantity: 1 Set
- Part Number: RK-18A-TISA-452
-
SealerSales Replacement Kit for TISA-455 Automatic Impulse Sealer
$30.09
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 18" TISA Series Automatic Impulse Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-18A5-TISA-455
-
SealerSales Replacement Kit for TISA-602 Automatic Impulse Sealer
$30.09
- Kit Includes: (2) 2mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 24" TISA Series Automatic Impulse Sealer w/ 2mm Seal Width
- Quantity: 1 Set
- Part Number: RK-24A-TISA-602
-
SealerSales Replacement Kit for TISA-605 Automatic Impulse Sealer
$36.09
- Kit Includes: (2) 5mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 24" TISA Series Automatic Impulse Sealer w/ 5mm Seal Width
- Quantity: 1 Set
- Part Number: RK-24A5-TISA-605
SealerSales Replacement Kit for FS-200C Hand Impulse Sealer
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
This replacement kit is for use with SealerSales FS-200C Hand Impulse Sealer. Replacement Kit Includes: (2) 3mm wide heating element, (2) 1/2" PTFE adhesive, (2) 1 3/4" PTFE cover, and (1) blade.
Note: We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.
Note: We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.
*This item is non-returnable.
Product Details
- Kit Includes: (2) 3mm wide heating element, (2) 1/2" PTFE adhesive, (2) 1 3/4" PTFE cover, and (1) blade.
- For Use With: 8" FS-Series Hand Sealer w/ 2mm Seal Width w/ Sliding Cutter
- Quantity: 1 Set
- Part Number: RK-8HC-FS-200C
