SealerSales W-300A 12" Automatic Impulse Sealer w/ 2.7mm Seal Width
555.79
NewCondition
InStock
SealerSales W-300A 12" Automatic Impulse Sealer w/ 2.7mm Seal Width
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
- 4
Product Name | Item Number | Price | Qty | ||
---|---|---|---|---|---|
SealerSales W-305A 12" Automatic Impulse Sealer w/ 5mm Seal Width | W-305A | $564.29
|
|||
SealerSales W-3010A 12" Automatic Impulse Sealer w/ 10mm Seal Width | W-3010A | $802.89
|
Product Description
This SealerSales W-300A 12" Automatic Impulse Sealer with 2.7mm Seal Width is designed for the continuous sealing of thermoplastic materials. This sealer is equipped to seal materials up to 12" wide and 10mil total thickness. It is controlled by a plug-in transistorized circuit board. Featured with an electronic timer and electromagnet, once correct settings have been established, consistent seals will be maintained automatically. The W-300A has 3 separate control settings for sealing time, recycle time, and congealing time to produce consistent seals. This impulse sealer can be operated automatically or manualy, and includes electric foot switch and worktable.
Product Details
- Automatic impulse sealing with precise electronic control.
- Dual mode operation: automatic or manual.
- Foot switch allows both hands to be free.
- 3 separate control settings for sealing time, recycle time, and congealing time to produce consistent seals.
- Includes electric foot switch and worktable.
- Easy to operate:
- For automatic operation, set the control on auto. Adjust the sealing time (heating time), congealing time (cooling time), and recycle time (automatic operation of jaws). Insert material to be sealed and when jaw opens, remove sealed material.
- For manual operation, set the control to manual. Insert the material to be sealed. Press down on the foot switch to activate the sealing bar.
Item Specifications
- Seal Length: 12" / 300mm
- Seal Width: 2.7mm
- Power: 450W
- Weight: 50LBS
- Dimensions: 17.3" x 14.2" x 7.9"
Resources
Questions & Answers
▶
Asked by Jim Gay
All automatic sealers will need maintenance on the units if they are sealing a high volume like 200,000 pcs. Timer setting, congeal time and recycle time will determine how often the consumable parts would have to be changed out. You might also have to eventually change our the solenoid because of the high volume.
Answered by MyBinding.com