SealerSales WN-500H 20" Long Hand Impulse Sealer
285.79
NewCondition
InStock
SealerSales WN-500H 20" Long Hand Impulse Sealer
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
Product Description
This SealerSales WN-500H Long Hand Impulse Sealer with 2.7mm seal width offers a 20" long sealing length for specialized sealing needs, and is ivory in color. It has a steel construction for quality and durability. Blade cuts approximately 3/4" from the seal line. The WN-500H is easy to operate, simply set the timer, insert the bag between the sealing bar and press down on the seal bar. For the best quality seal, hold the seal bar down a couple of seconds after the light goes off before resealing.
Product Details
- Longer seal lengths for specialized sealing needs.
- No-warm up time.
- Heavy duty construction.
- Available with cutter unit.
- Manufacturer's replacement kit includes 2 elements and 1 blade if cutter unit is ordered.
- Easy to Operate:
Simply set the timer, insert the bag between the sealing bar and press down on the seal bar. For the best quality seal, hold the seal bar down a couple of seconds after the light goes off before resealing. For sealers w/ a sliding cutter, slide across the bag while holding the seal bar down to cut the bag.
Item Specifications
- Sealing Length: 19.75"
- Seal Width: 2.7mm
- Power Supply: 220V
- Power (W): 600
- Dimensions (L x W x D): 28" x 5" x 10"
- Weight: 31LBS
Demonstration Video
PFS-200B - How to Seal Tubes
Transcript:
Instruction Series: How to use our hand sealer to sela tubes. For sealing tubes, we have found the PFS-200B to be a great value priced option for small and sample productions. Always send us a sample first to determine if the PFS-200B will be an appropriate choice. We recommend starting with the timer setting at #3 and turning the timer up in increments if required. If timer setting is too low, turn dial up a notch. Place the tube on the seal surface and depress the seal arm. The timer light will flash on then off. IMPORTANT: Continue holding the seal bar down for an additional 5+ second to co ...
Read More
Instruction Series: How to use our hand sealer to sela tubes. For sealing tubes, we have found the PFS-200B to be a great value priced option for small and sample productions. Always send us a sample first to determine if the PFS-200B will be an appropriate choice. We recommend starting with the timer setting at #3 and turning the timer up in increments if required. If timer setting is too low, turn dial up a notch. Place the tube on the seal surface and depress the seal arm. The timer light will flash on then off. IMPORTANT: Continue holding the seal bar down for an additional 5+ second to congeal (set) the seal. Sample seal. To get a more equal looking sal on both sides of the tube, request part #SR-TISH-300 or order a piece of Zone PTFE to place on the silicone rubber located on the seal arm. Sample seal using PRFE on silicon rubber. Sample seal.