0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
SKILCRAFT Gray Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes)
$112.28 NewCondition InStock
SKILCRAFT Gray Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes)

SKILCRAFT Gray Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes)

Part #: NSN2633425
2 Questions, 2 Answers
Brand: Skilcraft

Your Price: $112.28

Retail: $123.39

You Save: 9%

Brand New Price Match Guarantee In Stock Free Shipping 1 Year Warranty
Main Features:
  • Number of Punch Heads: 3 - (15" Apart) - Adjustable
  • Punch Positions: 3 Hole
  • Punch Shape: Round
  • Paper Punch Capacity: 28 Sheet of 20 lb Paper
Additional Sizes Below

AdditionalOptions

Product Item Number Price Qty
SKILCRAFT Beige Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes) Item Number : NSN1394101 Price :

Your Price: $112.28

Retail: $123.39

You Save: 9%

Qty :
SKILCRAFT Black Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes) Item Number : NSN4316251 Price :

Your Price: $112.28

Retail: $123.39

You Save: 9%

Qty :

ProductDescription

The SKILCRAFT Gray Heavy-Duty Adjustable 3-Hole Punch (13/32" Holes) will drill through 34 sheets of 16 lb. paper or 28 sheets of 20 lb. paper. Design offers heavy-duty steel construction, adjustable paper guide, measurement scale and lever action for easy punching. Removable chip tray collects chads for easy disposal. Fully adjustable punch heads allow paper sizes up to 15. Scuff-resistant and slip-resistant rubber feet keep the hole punch in place.

Product Details

  • Punches up to 34 sheets of 16 lb. paper, up to 28 sheets of 20 lb. paper; 13/32" holes.
  • Fully adjustable, punch heads allow paper sizes up to 15".
  • Adjustable paper guide, measurement scale and lever action for easy punching.
  • Scuff-resistant and slip-resistant rubber feet keep hole punch in place.
  • Heavy-duty steel; Gray.

ItemSpecifications

  • Product Type: Manual Hole Punch
  • Number of Punch Heads: 3 - (15" Apart) - Adjustable
  • Punch Positions: 3 Hole
  • Punch Shape: Round
  • Paper Punch Capacity: 28 Sheet of 20 lb Paper
  • Punch Size: 2/5"
  • Features: Lever Handle, Non-skid Base, Scuff Resistant, Adjustable Paper Guide, Heavy Duty and Removable Chip Tray
  • Color: Gray
  • Material: Steel
  • Warranty: Manufacturer's one-year limited warranty

ProductReviews

There are No Reviews on this Product Yet

DemonstrationVideo

Overview and Change a Punch Head

Transcript: This is the SKILCRAFT Heavy-Duty Adjustable 3-Hole Punch!

I’ll start with an overview of the hole punch, and end on how to change a punch head.

First off, we’ll punch the maximum amount of pages with 28(20 lb paper). It’s a bit of a tight fit for this many pages, and punching it is not all that easy and requires a pretty decent amount of pressure. But in the end it does a good job.

Another thing to note, if you grasp the handle, you’ll end up hitting your fingers on the way down. The best motion is to have an open palm on the way down.

You’ll see that the punch heads can ...
Read More
This is the SKILCRAFT Heavy-Duty Adjustable 3-Hole Punch!

I’ll start with an overview of the hole punch, and end on how to change a punch head.

First off, we’ll punch the maximum amount of pages with 28(20 lb paper). It’s a bit of a tight fit for this many pages, and punching it is not all that easy and requires a pretty decent amount of pressure. But in the end it does a good job.

Another thing to note, if you grasp the handle, you’ll end up hitting your fingers on the way down. The best motion is to have an open palm on the way down.

You’ll see that the punch heads can be aligned using the inch measurements on the front.

On the back, you can also adjust the margin stops for thicker or thinner margins. Also note that the pages are limited by the punch heads at a certain point as well.

With the adjustable edge guide, it is open to have evenly center punches on a wide variety of paper sizes. The edge guide pulls out after the 18 inch mark.

With fully moveable and removable punch heads, it opens up the possibilities for a number of punches, from one, two, three, four…five…

To empty the trimmings, the easiest way would be to flip it upside-down over a trash or recycle—but you can also push on the bottom plate and remove it from the punch. It pushes firmly back into place from the bottom.

Now to change a punch head.

First remove one of the side screws, and loosen all the punch heads, and the depth of margin stops. Then pull out the square bar.

Next, holding the rounded bar is a circular locking piece. Take a screw drive to pry this off. Make sure to cup your hand around it in case it goes shooting off across the room.

Then pull the bar out as needed and remove any of the punch heads. Slide any new ones in and push the bar back into position. Getting the lock piece on, for me at least was the hardest part—if you know and easier way, we’re welcome to hear you input.

Slide the punch heads into position, and put the square bar back on, slipping the depth margin stops in. Finish it off with the final screw.
Questions & Answers
Q:
Do you sell the replacement punch heads in 9/32"?
Asked by Phil Cousins
A:
Thank you for your question. Unfortunately we do not have a 9/32" replacement head available for the SKILCRAFT Heavy-Duty Adjustable 3-Hole Punches (13/32" Holes).

Answered by MyBinding 8 months ago
Q:
Is this available with 11/32" holes?
Asked by Paul Bauml
A:
Thank you for your question. Unfortunately we do not have a SKILCRAFT Heavy-Duty Adjustable 3-Hole Punch with a 11/32" hole. The ones we have are 1/4", 9/32" and 13/32" .

Answered by MyBinding 1 years and 8 months ago ago
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit