T300 Total Trimmer 40" Material Cutter from Logan Graphics
424.07
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
Fletcher-Terry F3100 63" Multi-Material Cutter
$3,487.39
- Spring loaded cutting head assembly with interchangeable pillar post.
- Material clamp covers the entire machine to prevent buckling and shifting of material.
- Cutting head rides on high tensile strength steel, hard chrome plated and polished.
- Max Cut Length: 63"
-
Fletcher-Terry Titan 40" Board Cutter
$866.49
- Cut Length: 40"
- Max Material Thickness: 1/2"
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
-
Fletcher-Terry Titan 80" Board Cutter
$1,205.49
- Cut Length: 80"
- Max Material Thickness: 1/2"
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
-
Fletcher-Terry Titan 100" Board Cutter
$1,378.79
- Cut Length: 100"
- Max Material Thickness: 1/2"
- Dual head position for cutting and trimming.
- Through-cutting for semi-rigid materials.
T300 Total Trimmer 40" Material Cutter from Logan Graphics
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
- 4
- 5
- 6
Product Description
An all purpose board mounted substrate trimming tool ready to size virtually any suitable flat materials that can be cut with a razor blade. Foamboard, illustration board, mat board, Coroplast, watercolor paper etc. are all downsized quickly and accurately. It includes a 27" (69cm) squaring arm, pull style cutting head with auto-retraction after each cut, adjustable blade depth and cuts up to 1/2" (13mm) of suitable material. Includes extra blades. uses Logan replacement blade #267.
Product Details
- 40" (101cm) capacity
- Professional straight cutter for signs, graphics, art & framing.
- Cuts up to 1/2 inch (13 mm) thickness (PVC foamboard, foamboard, honeycomb & corrugated plastic, vinyl & plastic film, mat board, illustration board, papers, fabric).
- Adjustable knob depth settings of 1/8 inch (3 mm), 1/4 inch, (6 mm), 1/2 inch (13 mm).
- Includes 5 #267 blades.
- Safety features such as auto blade release and “twist and lock” blade cut setting.
- Simple “knob adjust” depth setting.
- Heavy duty 3/4 inch (19 mm) MDF composite board base, extra long 32 inch (81 cm) squaring arm, ergonomic cutting head, rubber bar grip, lifter bar .
- Includes 10 extra blades. Uses blade #267.
Demonstration Video
T300 and T360 Total Trimmer Demo
Transcript:
Included with the Total Trimmer is a base board, the cutting head, a squaring arm, width stop, extra blades, and the instruction manual. To assemble the machine, lift the guide rail and find the board slot. Use a screwdriver to remove the two screws that are in the board slot. Install the squaring arm and replace the screws. To install the blade, release the blade holding knob and insert one blade sharp side down. Tighten the blade holding knob and replace the cutting head to the neutral position. To set the blade depth, use the blade depth setting chart. Loosen the blade knob and adjus ...
Read More
Included with the Total Trimmer is a base board, the cutting head, a squaring arm, width stop, extra blades, and the instruction manual. To assemble the machine, lift the guide rail and find the board slot. Use a screwdriver to remove the two screws that are in the board slot. Install the squaring arm and replace the screws. To install the blade, release the blade holding knob and insert one blade sharp side down. Tighten the blade holding knob and replace the cutting head to the neutral position. To set the blade depth, use the blade depth setting chart. Loosen the blade knob and adjust the blade depth knob to the proper number. Ensure that you retighten the blade knob after the blade depth is set. To size material, use the lifter bar mechanism to lift the rail. Insert the material to the squaring arm number needed, set the rail down, slide the cutting head past the end of the material, activate the blade, and pull back. Note that the blade cutting head retracts itself automatically. To use the squaring arm production stop, set it to the size needed and tighten in place. This will speed up the process of downsizing material.
Recommended for you
