Tamerica Optimus-21 Manual Plastic Comb Binding Machine
94.90
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
Tamerica 190PB Manual Plastic Comb Binding Machine
$214.99
- All Metal Construction.
- Max. Punching Capacity: 5,000 sheets/ hr (20 sheets of 20lb paper)
- Max. Binding Capacity: 250 books/ hr up to 2" thick
- Punching Length: up to 11" (with open throat)
-
Tamerica TCC2100 Manual Plastic Comb Binding Machine
$248.61
- Combines a sleek design along with sturdy, all metal construction
- 4-position punching depth adjustment
- 20 sheet punching capacity
- 1 year manufacturer warranty
-
Tamerica TCC2100E Electric Plastic Comb Binding Machine
$625.00
- All-metal construction for heavy usage
- Has 21 fully disengageable dies and hollow ground self-sharpening dies
- 15 sheet punching capacity
- 1 year manufacturer warranty
-
Tamerica 213PB Plastic Comb 3-Hole Punch Binding Machine
$311.49
- Punching Capacity: up to 20 sheets per lift (20 lbs paper)
- Punch Length: 12"
- Punching Speed: 5,000 sheets/ hr up to 12" or 21 holes and binds 250 books/ hr up to 2" thic
- 21 Disengageable dies.
Tamerica Optimus-21 Manual Plastic Comb Binding Machine
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
Product Description
The Tamerica Optimus-21 Manual Plastic Comb Binding Machine is perfect for the office who is looking for a manual plastic comb binding machine. The Optimus-21 is a 19-Ring comb binder that can bind 20lb paper up to 15 sheets and has fully disengageable pins (21 dies). The Optimus 21 also features an adjustable depth margin of 2.5; 4.5 and 6.5mm. This Tamerica Optimus-21 Manual Plastic Comb Binding Machine has 1 year manufacturer warranty.
Product Details
- Manual punch.
- Comb Spreader and Closer.
- Punches up to 20 sheets per lift (20 lbs paper).
- 12" Punch Length with open throat.
- Horizontal Paper Load.
- Disengageable Dies.
- Adjustable Punch Depth.
- Adjustable Edge Guide.
- Dimensions: 17" x 9" x 13".
- For Moderate Use.
- 1 Year Warranty.
Item Specifications
- Comb Binder: 19-Ring
- Operation: Manual Punch & Bind
- Maximum Punching Capacity: 15 Sheets of 20lb paper
- Maximum Binding Capacity: Up to 2"
- Maximum Sheet Size: A4
- Adjustable Depth Margin: 2.5mm; 4.5mm; 6.5mm
- Maximum Punching Length: 12" / 21 Dies - Open Throat
- Die: Fully Disengageable Pins (21 Dies)
- Warranty: 1 Year
Demonstration Video
Tamerica Optimus-21 Comb Binding Machine
Transcript:
This is the Tamerica Optimus-21 Manual Plastic Comb Binding Machine!
On the front you’ll see there are some common measurements labeled. From there, you can first adjust the edge guide for the correct size. To ensure there are no incomplete punches, pull out the appropriate disengageable die pins.
It’s always best to do a test page first. Now fold it in half, and if the holes line up then you are ready. If not, further adjust the edge guide.
We always like to start off with the front and back covers. Since they are thicker, only punch up to 2 at a time. Then continue punching your pag ... Read More
On the front you’ll see there are some common measurements labeled. From there, you can first adjust the edge guide for the correct size. To ensure there are no incomplete punches, pull out the appropriate disengageable die pins.
It’s always best to do a test page first. Now fold it in half, and if the holes line up then you are ready. If not, further adjust the edge guide.
We always like to start off with the front and back covers. Since they are thicker, only punch up to 2 at a time. Then continue punching your pag ... Read More
This is the Tamerica Optimus-21 Manual Plastic Comb Binding Machine!
On the front you’ll see there are some common measurements labeled. From there, you can first adjust the edge guide for the correct size. To ensure there are no incomplete punches, pull out the appropriate disengageable die pins.
It’s always best to do a test page first. Now fold it in half, and if the holes line up then you are ready. If not, further adjust the edge guide.
We always like to start off with the front and back covers. Since they are thicker, only punch up to 2 at a time. Then continue punching your pages—up to 15 pages at a time.
In most cases you can punch your pages and immediately put it into the binding, but since this handle has a dual function, it gets a little tedious—so we recommend setting them to the side and doing it all at once.
Insert your comb binding properly into the teeth of the machine, and push the handle back, hooking the comb and opening it up.
Then take your front cover and insert it in face down. Continue to add in the rest of your pages face down, and finish it off with the back cover.
Bring the handle back into a straight position, and now you have a comb binding bound book!
Of course there are more features, like a depth of margin control. Set this for making thinner books and bindings, or larger ones.
It also has an open throat design, which means you can take longer pages and punch them as well—or virtually any smaller size with the disengageable pins.
From time to time, empty the waste tray in the back, and put it back in.
There is also a guide on the front for what size binding you’ll need for the size project you are making.
On the front you’ll see there are some common measurements labeled. From there, you can first adjust the edge guide for the correct size. To ensure there are no incomplete punches, pull out the appropriate disengageable die pins.
It’s always best to do a test page first. Now fold it in half, and if the holes line up then you are ready. If not, further adjust the edge guide.
We always like to start off with the front and back covers. Since they are thicker, only punch up to 2 at a time. Then continue punching your pages—up to 15 pages at a time.
In most cases you can punch your pages and immediately put it into the binding, but since this handle has a dual function, it gets a little tedious—so we recommend setting them to the side and doing it all at once.
Insert your comb binding properly into the teeth of the machine, and push the handle back, hooking the comb and opening it up.
Then take your front cover and insert it in face down. Continue to add in the rest of your pages face down, and finish it off with the back cover.
Bring the handle back into a straight position, and now you have a comb binding bound book!
Of course there are more features, like a depth of margin control. Set this for making thinner books and bindings, or larger ones.
It also has an open throat design, which means you can take longer pages and punch them as well—or virtually any smaller size with the disengageable pins.
From time to time, empty the waste tray in the back, and put it back in.
There is also a guide on the front for what size binding you’ll need for the size project you are making.
