We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:

TwinTac Double-Sided Mounting Adhesive
FAQ: 0 Questions, 0 Answers
0 Q&As
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat
Item# TTACDSMA
- Film Length: 150'
- Film Width: 25.5" - 51"
- Film Thickness: 2 mil - Monomeric Calendared PVC
- Adhesive: 25µ (1 mil) on each side of the film - Permanent Aqueous Acrylic (Pressure Sensitive)
ProductDescription
This TwinTac Double-Sided Mounting Adhesive is consists of a smooth coating of aqueous acrylic adhesive on both sides of a 2.0 mil clear PVC (vinyl) film. TwinTac mounting adhesive has two moisture stable release liners that protect the adhesive, one on either side of the film. Plus, the double release papers protect the adhesive layer before use, thus preventing any contamination during handling. This mounting adhesive is suitable for all mounting applications and great for cut sheet applications because of its two release liners. Also, this TwinTac mounting adhesive is perfect for production of pre-coated boards.
Product Details
- Suitable for a variety of mounting applications.
- The twin release liners allow it to be cut to the correct size for the required job, thus reducing waste.
- Ideal for the mounting of various substrates such as white display board, foam boards, Gatorfoam, and tempered hardboard.
Item Specifications
- Film Length: 150'
- Film Width: 25.5" - 51"
- Film Thickness: 2 mil - Monomeric Calendared PVC
- Ratio Film/Adhesive: 1:1
- Adhesive: 25µ (1 mil) on each side of the film - Permanent Aqueous Acrylic (Pressure Sensitive)
- Heat Resistance Range: 70°C-95°C (158°F-203°F)
- Peel Strength (20 min, FTM1): 23 N/25mm
- Release Liner: 1 Side PE Coated Siliconized Kraft Paper with Grey Grid
- Initial Tack: Medium
- Application Speed: 0.3m - 1.5m (1'-5') per minute
- Application Temperature: Room temperature - 49°C (120°F)
- Application: Picture Framing/Photography
Technical Data
TwinTac is a 2 mil (50µ) clear monomeric calendared PVC film, coated on both sides with a pressure sensitive, acrylic adhesive, both of which are protected by a gridded bleached Kraft release paper coated on one side with siliconized PE.
Typical Applications
Product Structure
Physical Characteristics
Process Settings
Typical Applications
- Suitable for a variety of mounting applications.
- Twin release liners allow it to be pre-cut to the correct size for the required job beforehand, thus reducing waste.
- Ideal for mounting to various substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.
Product Structure
Release Liner | 1 Side PE Coated Siliconized Kraft Grid Paper |
---|---|
Adhesive | Permanent Acrylic (Pressure Sensitive) |
Film | Monomeric Calendared PVC |
Physical Characteristics
Film Thickness | 2 mil (50µ) |
---|---|
Adhesive Layer | 1 mil (25µ) on each side |
Film/Adhesive Ratio | 1:2:1 |
UV Protection Factor | Not Applicable |
Outdoor Durability | Not Applicable |
Service Temperature Range | -4°F to 203°F (-20°C to 95°C) |
Peel Strength (20 min, FTM1) | 23 N/25mm |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
Equipment Type | Temperature | Dwell Time |
---|---|---|
Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
Press | Not recommended |