Visual Magnetics InvisiLock-30HP Sheet Magnet - 23.875" x 23.875" White 1-Sided Adhesive Backed High Energy (15pk)

Visual Magnetics InvisiLock custom engineered magnet is designed specifically for use with the Visual Magnetics Graphic System. VM-InvisiLock-30HP can be applied to smooth interior fixture surfaces. The high-energy magnetic surface supports up to 4 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic. VM-InvisiLock-30HP includes Surface Protect, a white, scuff-protective layer, which safeguards graphics from marring when applying multiple layers.

---

Features and Benefits

• Surface Protect: white, scuff-protective layer.
• Supports up to 4 MagnaMedia layers.
• Proprietary polarity allows InvisiLock fixtures to lock in place.
• Flexible sheets for application to concave and convex surfaces.
• Excellent lay flat.
• Easy to cut and trim with a utility knife or scissors.
• Magnet engineered to low gauss level for safety.

---

Application Information

• Adhesive-backed magnet does not require ActiveWall primer.
• Use with any MagnaMedia product.
• Best for indoor fixture applications.
• Do not roll this material to less than 4" diameter, as adhesive wrinkling may result.

---

Physical Data

Total Caliper	30-mil / 762 Micron
Opacity	100%
Gauss @ 0.25" gap	<1
Adhesive Peel Adhesion	8# / in ; Stainless Steel – 30 min.
Adhesive Tensile Strength (MD/CD)	10# / in
Adhesive Elongation (MD/CD)	100 / 90%

---

Chemical Resistance

Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.

---

Shelf Life

One year when stored at 75° F (24°C) and 50% relative humidity or less.

---

Products / Sizes

PRODUCT CODE	AVAILABLE SIZES
VM30HP-24024	23.875 in x 23.875 in 15 tiles /case (60.6 cm x 60.6 cm)

---

Recyclability

VM-InvisiLock-30HP can be recycled using Visual Magnetics "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.

---

Product Safety

InvisiLock magnet is a ferrite-based magnet and poses no health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is "not recordable" using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a "magnetized material" per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.

  Technical Data Sheet
  Drytac Product Catalog 2017

Compatibility Key:   ⚫   VM certified best results     ◐   Profile dependent     X   Not compatible     △   HP Certified for Latex Inks