Visual Magnetics InvisiLock-30SA Sheet Magnet - 24.375" x 50' Black 1-Sided Adhesive Backed Standard Energy
173.33
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
Visual Magnetics InvisiLock-30SA Sheet Magnet - 24.375" x 50' Black 1-Sided Adhesive Backed Standard Energy
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
Product Description
This Visual Magnetics InvisiLock-30SA Sheet Magnet is a 24.375" x 50' adhesive-backed standard-energy black magnet that is designed specifically for use with the Visual Magnetics Graphic System. The InvisiLock-30SA uses a more aggressive permanent acrylic adhesive, that can be applied to smooth interior fixture surfaces. The standard-energy surface supports up to 3 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic. This Visual Magnetics InvisiLock-30SA 24.375" x 50' Sheet Magnet can be easily cut and trim by utility knife or scissors.
Product Details
- Modified Acrylic Adhesive-backed InvisiLock magnet.
- Standard-energy magnet supports up to 3 MagnaMedia layers.
- Excellent lay flat.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible rolls for application to concave and convex surfaces.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
- Adhesive-backed magnet does not require ActiveWall® primer.
- Use with any MagnaMedia product.
- Best for applications requiring a permanent aggressive adhesive for indoor fixture applications.
- Do not roll this material to less than 3" diameter, as adhesive wrinkling may result.
Item Specifications
- Size: 24.375" x 50'
- Total Caliper: 30-mil / 762 Micron
- Opacity: 100%
- Gauss @ 0.25" gap : <1
- Pull Force: 102# / SF
- Adhesive Peel Adhesion: Testing in progress
- Adhesive Tensile Strength (MD/CD): Testing in progress
- Adhesive Elongation (MD/CD): Testing in progress
Related Categories you might also like
Technical Data
Visual Magnetics InvisiLock custom engineered magnet is designed specifically for use with the Visual Magnetics Graphic System. VM-InvisiLock-30SA uses a more aggressive permanent acrylic adhesive, that can be applied to smooth interior fixture surfaces. The standard-energy surface supports up to 3 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic.
Features and Benefits
Application Information
Physical Data
Chemical Resistance
Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.
Shelf Life
One year when stored at 75° F (24°C) and 50% relative humidity or less.
Products / Sizes
Recyclability
VM-InvisiLock-30SA can be recycled using Visual Magnetics "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.
Product Safety
InvisiLock magnet is a ferrite-based magnet and poses no known health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is “not recordable” using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a “magnetized material” per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.
Features and Benefits
- Wide widths available 40" and 48".
- Modified Acrylic Adhesive-backed InvisiLock magnet.
- Standard-energy magnet supports up to 3 MagnaMedia layers.
- Excellent lay flat.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible rolls for application to concave and convex surfaces.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
Application Information
- Adhesive-backed magnet does not require ActiveWall primer.
- Use with any MagnaMedia product.
- Best for applications requiring a permanent aggressive adhesive for indoor fixture applications.
- Do not roll this material to less than 3" diameter, as adhesive wrinkling may result.
Physical Data
| Total Caliper | 30-mil / 762 Micron |
|---|---|
| Opacity | 100% |
| Gauss @ 0.25" gap | <1 |
| Adhesive Peel Adhesion | Testing in progress; Stainless Steel – 30 min. |
| Adhesive Tensile Strength (MD/CD) | Testing in progress |
| Adhesive Elongation (MD/CD) | Testing in progress |
Chemical Resistance
Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.
Shelf Life
One year when stored at 75° F (24°C) and 50% relative humidity or less.
Products / Sizes
| PRODUCT CODE | AVAILABLE SIZES |
|---|---|
| VM30SA-24050 | 24.375 in x 50 ft – 3 in core (61.9 cm x 15.2 m) |
| VM30SA-40050 | 40 in x 50 ft – 3 in core (101.6 cm x 15.2 m) |
| VM30SA-48050 | 48 in x 50 ft – 3 in core (121.9 cm x 15.2 m) |
Recyclability
VM-InvisiLock-30SA can be recycled using Visual Magnetics "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.
Product Safety
InvisiLock magnet is a ferrite-based magnet and poses no known health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is “not recordable” using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a “magnetized material” per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.
