Visual Magnetics InvisiLock-40HP Sheet Magnet - 23.875" x 23.875" White 2-Sided High Energy Adhesive Backed (15pk)
317.72
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
Visual Magnetics InvisiLock-40HP Sheet Magnet - 23.875" x 23.875" White 2-Sided High Energy Adhesive Backed (15pk)
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
Product Description
This Visual Magnetics InvisiLock-40HP Sheet Magnet is a 23.875" x 23.875" two-sided high-energy white magnet with surface protect that is designed specifically for use with the Visual Magnetics Graphic System. The InvisiLock-40HP attracts to surfaces that have been primed with ActiveWall, latex primer. The high-energy magnetic surface supports up to 4 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic. The InvisiLock-40HP includes Surface Protect, a white, scuff-protective layer, which safeguards graphics from marring when applying multiple layers.
Product Details
- Surface Protect: white, scuff-protective layer.
- High-energy magnet supports up to 4 MagnaMedia layers.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible sheets for application to concave and convex surfaces.
- Excellent lay flat.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
- Must use with ActiveWall ® Primer.
- Use with any MagnaMedia product.
- Best for wall applications.
Item Specifications
- Size: 23.875" x 23.875"
- Total Caliper: 40-mil / 1016 Micron
- Opacity: 100%
- Gauss @ 0.25" gap : <1
Technical Data
Visual Magnetics InvisiLock custom engineered magnet is designed specifically for use with the Visual Magnetics Graphic System. VM-InvisiLock-40HP attracts to surfaces that have been primed with ActiveWall, latex primer. The high-energy magnetic surface supports up to 4 MagnaMedia layers allowing for special promotions or accents to be applied on top of a base graphic. VM-InvisiLock-40HP includes Surface Protect, a white, scuff-protective layer, which safeguards graphics from marring when applying multiple layers.
Features and Benefits
Application Information
Physical Data
Chemical Resistance
Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.
Products / Sizes
Recyclability
VM-InvisiLock-40HP is fully recyclable / recoverable and can be reground and recovered to create new magnet material. See "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.
Product Safety
InvisiLock magnet is a ferrite-based magnet and poses no health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is "not recordable" using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a "magnetized material" per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.
Features and Benefits
- Surface Protect: white, scuff-protective layer.
- High-energy magnet supports up to 4 MagnaMedia layers.
- Proprietary polarity allows InvisiLock fixtures to lock in place.
- Flexible sheets for application to concave and convex surfaces.
- Excellent lay flat.
- Easy to cut and trim with a utility knife or scissors.
- Magnet engineered to low gauss level for safety.
Application Information
- Must use with ActiveWall Primer.
- Use with any MagnaMedia product.
- Best for wall applications.
Physical Data
Total Caliper | 40-mil / 1016 Micron |
---|---|
Opacity | 100% |
Gauss @ 0.25" gap | <1 |
Chemical Resistance
Resistant to water, detergent and alcohol. Not recommended for use in contact with aliphatic or aromatic hydrocarbons.
Products / Sizes
PRODUCT CODE | AVAILABLE SIZES |
---|---|
VM40HP-24024 | 23.875 in x 23.874 in 15 tiles/case (60.6 cm x 60.6 cm) |
Recyclability
VM-InvisiLock-40HP is fully recyclable / recoverable and can be reground and recovered to create new magnet material. See "Recycling Retired Graphics" program available for download at www.visualmagnetics.com.
Product Safety
InvisiLock magnet is a ferrite-based magnet and poses no health or safety issues. Unlike stronger, rare-earth neodymium permanent magnets, the multi-pole nature and lesser strength of ferrite magnets does not emit a strong magnetic field into the environment and therefore does not cause signal interference or damage with computerized equipment. At a gap of 0.25" or greater gauss readings are well below 1.0 and at 7 ft. the gauss level is "not recordable" using a Model 2010A Gauss Meter. Due to its low gauss emission, InvisiLock magnet is not recognized as a "magnetized material" per IATA (International Air Transportation Association) definition and therefore can be air shipped in bulk quantity.