WindowTac 25.5" x 164' Pressure Sensitive Mounting Adhesive
261.19 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

WindowTac 25.5" x 164' Pressure Sensitive Mounting Adhesive

Part #: PWD25164
Brand: Drytac
  • Clear, double-sided mounting adhesive with an embossed release liner
  • Provides additional UV protection for graphics printed with dye-based or pigmented inks
  • Excellent clarity without bubbles or wrinkling
  • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2

Product Description

This WindowTac 25.5" x 164' Pressure Sensitive Mounting Adhesive is a 0.9 mil visually clear PET film, coated on one side with a pressure sensitive, removable adhesive that is protected by a microgrooved PE release liner that imparts an embossed pattern onto the adhesive coating. The other side is coated with a pressure sensitive, aggressive permanent adhesive that is protected by a bleached Kraft release paper coated on both sides with PE and siliconised on the release side. The film contains UV stabilisers, which protect against UV degradation, and the micro-grooves in its adhesive allow for easy air evacuation. WindowTac film is recommended for face mounting graphics onto glass, acrylic, and other non-prous surface. It can also be used for backlit displays. Get 1 roll on every order of WindowTac 25.5" x 164' Pressure Sensitive Mounting Adhesive.

Product Details

    Features:

  • Clear, double-sided mounting adhesive with an embossed release liner
  • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
  • Excellent clarity without bubbles or wrinkling
  • Provides additional UV protection for graphics printed with dye-based or pigmented inks


    Benefits:

  • Transforms any printed image into an easy-to-install window graphic or decal
  • Graphics can be dry installed, cleanly removed and easily repositioned during installation
  • Suitable for double-sided window graphics
  • Ideal for face mounting of temporary graphics to glass, acrylic and other non-porous surfaces
  • Ideal for short-term promotional window advertising and POP displays

Technical Data

WindowTac is a 0.9 mil (23µ) visually clear PET film, coated on one side with a pressure sensitive, removable adhesive that is protected by a micro-grooved PE release liner that imparts an embossed pattern onto the adhesive coating. The other side is coated with a pressure sensitive, aggressive permanent adhesive that is protected by a bleached Kraft release paper coated on both sides with PE and siliconized on the release side. The film contains UV stabilizers, which protect against UV degradation, and the micro-grooves in its adhesive allow for easy air evacuation.

Typical Applications
  • Recommended for face mounting graphics onto glass, acrylic and other non-porous surfaces.
  • Can be used for backlit displays.
  • Can be re-positioned up to 10 times in the first 12 hours and cleanly removed within 12 months after application.
  • Can be used on media printed with all common print technologies, including (Eco) Solvent, Latex and UV.

Product Structure

Release Liner 2 Side PE Coated, 1 Side Siliconized Kraft
Adhesive Permanent Acrylic (Pressure Sensitive)
Film Visually Clear PET
Release Liner Embossed HDPE


Physical Characteristics

Film Thickness 0.9 mil (23µ)
Adhesive Layer 1 mil (25µ) permanent 0.6 mil (14µ) removable
Film/Adhesive Ratio 1:0.9:0.6
UV Protection Factor UV Stable
Outdoor Durability Not Applicable
Service Temperature Range -4°F to 248°F (-20°C to 120°C)
Peel Strength (20 min, FTM1) 22 N/25mm (permanent - glass) 3 N/25mm (removable - glass)
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment Type Temperature Dwell Time
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Prior to application, clean the mounting substrate with soap and water. Rinse thoroughly with water and wipe dry with a lintfree cloth. Window cleaners are not recommended.

Questions & Answers

Submit a New Question