IMAGin WindowVIEW 6mil 70/30 Perforated 54" x 25' One-Way Visibility Film
167.29 NewCondition InStock

IMAGin WindowVIEW 6mil 70/30 Perforated 54" x 25' One-Way Visibility Film

Part #: WV139W54L25
Brand: Mactac
1 Questions, 1 Answers
  • 70/30 hole to printable media ratio.
  • View graphics from one side and "see-through" from other side.
  • Solvent and latex printable.
  • 18 Months outdoor durability.
  • Price Match Guarantee
  • Free Shipping


Qualifies for FREE Shipping!*

  • 0
  • 1
  • 2
  • 3
Product Name Item Number Price Qty
IMAGin WindowVIEW 6mil 70/30 Perforated 54" x 100' One-Way Visibility Film WV139W54L100

Product Description

This IMAGin WindowVIEW 6mil 70/30 Perforated 54" x 25' One-Way Visibility Film is a 6 mil soft white vinyl film with black reverse side and 70% print surface and 30% open area with a 1.4 mm hole diameter for one-way visibility. It is coated on one side with a removable, clear, acrylic pressure sensitive adhesive and supplied with a 6 mil paper release liner. This print media is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.

Product Details

  • Features and Benefits:
    • 70/30 hole to printable media ratio.
    • View graphics from one side and "see-through" from other side.
    • Solvent and latex printable.
    • 18 Months outdoor durability.

  • Typical Uses:
    • Storefront advertising

  • Use with:
    • PERMACOLOR RAYZor Gloss LF3640

  • Physical Properties

    Property Typical Values Test Method
    Thickness, inches (mm)
    Film plus adhesive
    Film, adhesive and liner

    1.40 - 2.3 (6 - 10)
    FTM - 9
    Dimensional Stability, % Fair
    Temperature Range
    Minimum application:
    End Use:

    40°F (+4°C)
    0°F to 140°F (-15°C to 60°C)

    • Values given are typical for unprocessed product and are not for use as specifications. Processing may change the values.

  • Durability
    The outdoor durability of the unprinted film is 18 months. However, actual durability of the printed graphic is dependent on the inks and overlaminates used. Some adverse reactions may occur when applying WV139 to certain substrates such as acrylic glass, polycarbonate, polystyrene, plasticized PVC and certain paints. These reactions have a negative effect on the adhesive performance.

  • Glass Breakage
    MACtac accepts no liability for glass breakage due to temperature differences across the glass which can be caused by sunlight on dark areas of the graphic. Size, thickness, quality of cut, edge treatment, tinting and frame design all effect temperature stress.

  • Shelf Life
    1 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.

  • Approved Print Methods:

    Screen Printing:           HP Indigo     ☐
    UV Cured     ☐   Off-set     ☐
    Solvent     ☒   Off-set UV     ☐
    Digital: UV Inkjet     ☐   Thermal Transfer     ☐
    Eco-solvent     ☒   Flexographic     ☐
    True solvent     ☒   Laser     ☐
    Latex     ☒   Jetrion     ☐

    To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.

    The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.

  • Limitations
    • 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
    • 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
    • 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.

  • Recommendations
    Always test your combination of products, print media, inks and laminating films prior to commercial use.

    • a) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink saturation is 270%.
    • b) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to lamination.
    • c) Laminating Conditions: If the printed graphic is likely to be exposed to water, corrosive liquids, smoke, fumes, and highly polluted areas or there is a likelihood of scratching, it is highly recommended to laminate only with optically clear Permacolor SAG 36, SAG53 or LF3648 RAYZor laminating films.
    • d) Transportation Conditions: To allow for easy transportation, IMAGin JT5000 series can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm). When the image is not protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature and humidity changes.
    • e) Application: The “dry” method is recommended. The “wet” application method is not recommended due to the fact the moisture will become trapped between the perforations and overlaminate, therefore affecting the “see-through” visibility.
    • f) Trimming and Finishing Windows: Window trimming needs special care depending on the type of window you are marking:
      • a) Contact with Rubber Window Seals will cause the adhesive to fail. Therefore, graphics need to be trimmed off the rubber seals by 1/8 inch minimum.
      • b) Windows with beveled edges need to have the graphic trimmed away from the edge at a 45° angle to eliminate a hard edge that is easily peeled back.

Item Specifications

  • Adhesive Type: Permanent Acrylic
  • Color: White
  • Films: Vinyl (PVC)
  • Finish: Gloss
  • Length: 25'
  • Width: 54"
  • Liner Category: 6.0 mil Paper
  • Outdoor Durability: 1.5 Years
  • Precise Program: N
  • Print Method: Latex
  • Thickness: 6.0 mil

Technical Assistance Guide

Questions & Answers

Thanks for your question. Please pass along your shipping address and we will have a sample of that material shipped to you. I have asked the customer listed for their address and will have the manufacture send that sample.

Answered by MyBinding
3 years and 8 months ago ago

Submit a New Question