9/32" Replacement Punch Head Kit for Swingline High Capacity Heavy Duty Punch - 74871
- Replacement punch kit
- Compatible with Swingline® High Capacity Heavy Duty Punch only
- 9/32" punch hole diameter
- 75 sheet capacity
- 1 set contains 3 replacement heads and 5 discs
- UPC: 50050505748711
- Punch Hole Size: 9/32"
- Sheet Capacity (20 lb paper): 75
This is the Swingline High Capacity Heavy Duty 3-Hole Punch!
It can punch of to 75 pages at a time, which takes a little more time, and forgive me while I put my elbow in the shot, but the strain is minimal.
Rotate all the pads at once with the front slider. Do this to keep clean punches through all your sheets.
In the back is the waste tray, empty this periodically so it doesn’t overfill.
In the box is an extra set of pads, and replacing them is simple. On the bottom of the machine, push the red buttons to remove the old pads. You may need to use some extra force to get them out. Then slip the old pad out and push in a new one—this will also take some good wiggling and pushing to get in.
To replace the punch head, unscrew the front screw. The whole side will come off with the punch head. Remove the head and swap in a new one. Then line up the holes, insert your screw and screw it back on.
Finally, you can purchase replacement punch heads and pads with the product number of 74871.