48" x 164' Walk & Wall Ink Jet Graphics - WALK&WALL-48X164
1056.16 NewCondition InStock
48" x 164' Walk & Wall Ink Jet Graphics - WALK&WALL-48X164
- 0
Product Description
Walk & Wall Ink Jet Graphics is a multi-use material suitable for interior and exterior surfaces. It has a textured surface that does not need lamination; its fabric backing provides dimensional stability for exceptional quality prints. Make materials for tradeshows, POPs, sidewalk graphics, and directional floor and wall graphics that stand out as the media can be digitally printed using solvent, eco-solvent, UV, and latex. It can also be screen printed. The material can be repositioned and adjusted for precise application during initial installation. It removes cleanly without leaving any adhesive residue for up to 6 months.
- Applications
- Tradeshows (Concrete, Carpet & Wall Graphics)
- POP (Floor & Wall Graphics)
- Sidewalk Graphics
- Interior and Exterior Directional Floor and Wall Graphics
- Printing Methods
- Digital - Solvent, Eco-Solvent, UV, & Latex
- Screen Print
- Advantages
- True Multi-Use Material for Interior and Exterior Surfaces
- Fabric Backing Creates Additional Dimensional Stability
- Inherent Textured Surface Means NO Lamination
- Repositionable for Easy Install
- Removes Cleanly up to 6 Months without Residue
Surface must be clean and dry. For best results, apply with a hard rubber roller to ensure adequate adhesion. Rounding corners helps prevent edge lift. For full installation and removal recommendations, please refer to “Wal &Wall® Installation & Removal Recommendations”.
Product Details
- Material
- Face Film: Printable White Textured PVC
- Back Side: White, Textile
- Adhesive: Repositionable Solvent Acrylic
- Liner: Polyethylene-Coated
- Film Thickness: 12 mil (300µ +/- 5µ)
- FR Certification: ASTM E84, M1, B1
- Slip Rating: ANSI A137.1/A326.3, 67212F, R12
- Durability
- Interior:
Up to 3 Years – Vertical Surfaces
Up to 3 Months – Flooring Surfaces, Dependent on Traffic - Exterior:
Up to 1 Year - Vertical Exposure under Normal Conditions
Up to 3 Months – Ground Surfaces, Dependent on Traffic - Environment: Humidity & Solvent Resistance – Good
- Shelf Life: 1 Year
- Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 40% to 65%
- Repositionable: Yes – During Initial Installation
- Interior:
- Application/Removal
- Application Temp: +25°F to +86°F (+10C to +30°C)
- Service Temp: +0°F to +122°F (-17°C to +50°C)
- Removability:
Clean Removal with No Adhesive
Residue, up to 6 Months – Adhesion
May Increase over Time - Removal Temp: +50°F (+10°C) or Greater
- Exclusions:
NOT To Be Applied On Fresh Paint,
Polycarbonate, and Some PVC
(No Exhaustive List Available)
Product Reviews
Write Your Own Review
