Cold Process Laminators

MyBinding.com carries a huge assortment of cold laminators for the application of pressure sensitive adhesives, overlaminates and for use in mounting applications. If you are looking for a low cost low volume unit you might consider one of our hand crank manual pressure sensitive laminators. However, if you need a powered model you can consider one of our jet-mounter, or a GBC or Royal Sovereign cold process model. The fact that these laminators don't need heat means that they are immediately ready to run and do not usually require special 220 or 3 phase power like larger heated units. Some of these systems are cold only models designed for use solely with cold laminating films. Others offer heat assist for easier application of pressure sensitive films. However, if you are looking for a machine that can do both hot and cold lamination you might want to consider a wide format laminator or commercial laminator that has a cold mode.

Items 1-16 of 53

Display Type List Grid
Page
  1. Xyron 9" Creative Station Laminator with 5" Option - 624632

    • Create instantly - without heat or electricity there is no waiting.
    • Safe for you and the environment - cartridges are acid-free and non-toxic giving off no odor and making no mess.
    • Drop-in refill cartridges allow you to switch applications quickly and easily.
    • Choose between 9 cartridges in 5in or 9in widths to enhance your projects with minimal waste. Cartridges sold separately.
    Part #: 624632

    $62.73

  2. Xyron 5" Creative Station Lite Laminator - 624740

    • Color: White
    • Enjoy applying edge-to-edge acid-free permanent adhesive to in two sizes.
    • Choose between 6 cartridges to enhance your projects with minimal waste.
    • Insert items up to 1/8th inches thick.
    Part #: 624740

    $37.89

  3. JetMounter JM34 Electric 34 Inch Pressure Sensitive Cold Mount Laminator

    • Max Laminate Width: 34.25"
    • Laminating Speed: 18' per Minute
    • Max Film Thickness: 10 mil
    • Hot or Cold: Cold
    Part #: JM34

    $1,498.95

  4. Xyron Create-A-Sticker Model 150 with Cartridge - XRN150

    • Simply insert the item, pull thru and peel sticker. It's that easy.
    • Apply adhesive edge-to-edge for a strong hold.
    • No messy glue to clean-up.
    • Comes with non-toxic, acid-free, permanent adhesive.
    Part #: XRN150

    $8.41

  5. Polar E 55" Electric Cold Mount Roll Laminator Starter Kit

    • This starter kit is everything you need to start mounting and laminating.
    • Comes complete with the (1) Polar E 55" Laminator, (1)ImageEdge Foam Board Cutter, Laminator Stand, and Supplies.
    • Can run board thicknesses of up to 1/2" thick.
    • Rugged steel and aluminum construction.
    Part #: CL55E-KIT

    $3,690.47

  6. Polar E 38" Electric Cold Mount Roll Laminator Starter Kit

    • This starter kit is everything you need to start mounting and laminating.
    • Comes complete with the (1) Polar E 38" Laminator, (1)ImageEdge Foam Board Cutter, Laminator Stand, and Supplies.
    • Can run board thicknesses of up to 1/2" thick.
    • Rugged steel and aluminum construction.
    Part #: CL38E-KIT

    $2,614.29

  7. Polar E 25" Electric Cold Mount Roll Laminator Starter Kit

    • This starter kit is everything you need to start mounting and laminating.
    • Comes complete with the (1) Polar E 25" Laminator, (1)ImageEdge Foam Board Cutter, Laminator Stand, and Supplies.
    • Can run board thicknesses of up to 1/2" thick.
    • Rugged steel and aluminum construction.
    Part #: CL25E-KIT

    $2,264.29

  8. Xyron 1255 12" Professional Laminator - XM1255

    • Laminating Thickness: 1/8"
    • Hot or Cold: Cold
    • Variable Temperature Control: No
    • Reverse Function: No
    Part #: XRN1255

    $242.31

  9. Royal Sovereign RSC-1651CLTW 65" Cold Roll Laminator

    • Can laminate and mount pressure-sensitive graphics up to 65" wide.
    • Capable of producing both single sided and cold lamination as well as mounting of display image.
    • Built for safety and ease of use
    • Lamination Speed: 16.4
    Part #: RSC-1651CLTW

    $5,825.00

  10. Xyron Create-A-Sticker Model 500 with Cartridge - XRN500

    • Simply place item, turn knob, tear and peel sticker. It's that easy.
    • Apply adhesive edge-to-edge for a strong hold.
    • No messy glue to clean up.
    • Comes with non-toxic, acid-free, permanent adhesive.
    Part #: XRN500

    $30.88

  11. Xyron Create-A-Sticker Mini (Model 250) with Cartridge - XRN250-CFTEN

    • Simply place item on the feed tray, turn knob, tear and peel sticker. It's that easy.
    • Apply adhesive edge-to-edge for a strong hold.
    • No messy glue to clean up.
    • Comes with 20' acid-free permanent adhesive cartridge
    Part #: XRN250-CFTEN

    $26.13

  12. Royal Sovereign Sigmont 55H 55" Heat Assist Roll Laminator

    • High Grade Silicone Rollers for Consistent Lamination.
    • Rear Slitters for Inline Print Separation.
    • Max Lamination Speed (fpm): 49.2'
    • Roller Diameter: 5.125" (130mm)
    Part #: SIGMONT-55H

    $5,714.29

  13. Royal Sovereign Sigmont 65H 61" Heat Assist Roll Laminator

    • High Grade Silicone Rollers for Consistent Lamination.
    • Rear Slitters for Inline Print Separation.
    • Max Lamination Speed (fpm): 49.2'
    • Roller Diameter: 5.125" (130mm)
    Part #: SIGMONT-65H

    $6,285.71

  14. Polar Cub 25" Manual Cold Mount Roll Laminator Starter Kit

    • This starter kit is everything you need to start mounting and laminating.
    • Comes complete with the (1) 25" Polar Cub Laminator, (1)ImageEdge Foam Board Cutter, and Supplies
    • Can mount boards up to 1" thick
    • Great for mounting larger prints
    Part #: CL25CUB-KIT

    $611.76

  15. Polar E 55" Electric Cold Mount Roll Laminator

    • Can run pressure sensitve mounting and laminating films
    • Can run board thicknesses of up to 1/2" thick.
    • Speed: 3 feet per minute
    • Automatic mechanism to take off the liner from laminating films while processing.
    Part #: 04POLARE55

    $2,370.25

  16. Polar E 38" Electric Cold Mount Roll Laminator

    • Media Bar which holds prints in place when mounting.
    • Single knob for roll height adjustment assures rollers are always parallel.
    • Automatic mechanism to take off the liner from laminating films while processing.
    • Can be run with or without a footswitch, foot pedal is included.
    Part #: 04POLARE38

    $1,624.00

Items 1-16 of 53

Display Type List Grid
Page

Cold Laminators Overview Video

Transcript: Welcome to MyBinding video. MyBinding.com carries a huge assortment of cold laminators for the application of pressure-sensitive adhesives over laminates and for use in mounting applications. If you’re looking for a low-cost volume cold laminator, you might consider one of our hand-cranked manual pressure-sensitive laminators. However, if you need a powered model, you can consider one of our jet-mounter laminators or a GBC or Royal Sovereign cold press laminator. And here at MyBinding, we carry all the supplies that you’ll ever need for. Give us a call, we’d love to walk you through wh... Read More
Welcome to MyBinding video. MyBinding.com carries a huge assortment of cold laminators for the application of pressure-sensitive adhesives over laminates and for use in mounting applications. If you’re looking for a low-cost volume cold laminator, you might consider one of our hand-cranked manual pressure-sensitive laminators. However, if you need a powered model, you can consider one of our jet-mounter laminators or a GBC or Royal Sovereign cold press laminator. And here at MyBinding, we carry all the supplies that you’ll ever need for. Give us a call, we’d love to walk you through whatever your need are, and our knowledgeable staff is ready to help you. When image matters, MyBinding.