48" x 84' Walk & Wall Ink Jet Media - WALK&WALL-48X84
528.08
NewCondition
InStock
48" x 84' Walk & Wall Ink Jet Media - WALK&WALL-48X84
- 0
Product Description
For wall and floor graphics with impact, use Walk & Wall Ink Jet Media. This media is a textured non-slip vinyl with a repositionable adhesive that aid in easy installation. The textured surface does not require additional lamination; it is ready to apply once printed. The material is safe for digital and screen printing. Fabric backing provides dimensional stability to ensure that prints are always perfect. It is suitable for indoor and outdoor use and is perfect for creating tradeshow materials, POPs, sidewalk graphics, and directional floor and wall graphics.
- Applications
- Tradeshows (Concrete, Carpet & Wall Graphics)
- POP (Floor & Wall Graphics)
- Sidewalk Graphics
- Interior and Exterior Directional Floor and Wall Graphics
- Printing Methods
- Digital - Solvent, Eco-Solvent, UV, & Latex
- Screen Print
- Advantages
- True Multi-Use Material for Interior and Exterior Surfaces
- Fabric Backing Creates Additional Dimensional Stability
- Inherent Textured Surface Means NO Lamination
- Repositionable for Easy Install
- Removes Cleanly up to 6 Months without Residue
Surface must be clean and dry. For best results, apply with a hard rubber roller to ensure adequate adhesion. Rounding corners helps prevent edge lift. For full installation and removal recommendations, please refer to “Wal &Wall® Installation & Removal Recommendations”.
Product Details
- Material
- Face Film: Printable White Textured PVC
- Back Side: White, Textile
- Adhesive: Repositionable Solvent Acrylic
- Liner: Polyethylene-Coated
- Film Thickness: 12 mil (300µ +/- 5µ)
- FR Certification: ASTM E84, M1, B1
- Slip Rating: ANSI A137.1/A326.3, 67212F, R12
- Durability
- Interior:
Up to 3 Years – Vertical Surfaces
Up to 3 Months – Flooring Surfaces, Dependent on Traffic - Exterior:
Up to 1 Year - Vertical Exposure under Normal Conditions
Up to 3 Months – Ground Surfaces, Dependent on Traffic - Environment: Humidity & Solvent Resistance – Good
- Shelf Life: 1 Year
- Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 40% to 65%
- Repositionable: Yes – During Initial Installation
- Interior:
- Application/Removal
- Application Temp: +25°F to +86°F (+10C to +30°C)
- Service Temp: +0°F to +122°F (-17°C to +50°C)
- Removability:
Clean Removal with No Adhesive
Residue, up to 6 Months – Adhesion
May Increase over Time - Removal Temp: +50°F (+10°C) or Greater
- Exclusions:
NOT To Be Applied On Fresh Paint,
Polycarbonate, and Some PVC
(No Exhaustive List Available)
Product Reviews
Write Your Own Review
