54" x 100' iTac Green Plus Ink Jet Media - TACGRNPLS-54X100
526.50
NewCondition
InStock
54" x 100' iTac Green Plus Ink Jet Media - TACGRNPLS-54X100
- 0
Product Description
The iTac Green Plus Ink Jet Media is the eco-conscious alternative to PVC. It is made with a multi-layered cast, polypropylene film with a reusable and washable adhesive. Removal is easy and mess-free. It leaves no adhesive residue and is highly repositionable. The media is suitable for smooth surfaces and can be used for floor graphics when laminated with ProtectWalk. Create visually appealing temporary vehicle graphics, counter mat material, elevator graphics, and temporary dance floors with this sustainable material. iTac Green Plus Ink Jet Media is suitable for digital and screen printing.
- Applications
- Temporary Vehicle Graphics
- Superb Counter Mat Material
- Elevator Graphics
- Short-Term Graphics on Granite, Marble, and Polished Stone
- Temporary Dance Floor/Event Graphics
- Printing Methods
- iTacGreen: Digital - UV & Latex; Screen Print; Offset
- iTacGreen Plus: Digital: Solvent, Eco-Solvent, UV, & Latex; Screen Print; Offset
- Advantages
- Easy Application on Smooth Surfaces and Removal with No Residue
- Washable, Reusable Adhesive Means Graphics May Be Used Again and Again Without Loss of Adhesion
- Laminate with ProtectWalk for Non-Skid Floor Graphics
Surface must be clean and dry. Prevent contact with solvent or ammonia-based cleaners. For best results, clean with a mild detergent and water and dry thoroughly. ALWAYS clean and dry glass surface prior to application. iTacGreen and iTacGreen Plus are not designed for structured surfaces. For full installation and removal recommendations, please refer to "iTacGreen Installation Recommendations".
Product Details
- Material
- Face Film:
Printable Biaxially-Oriented
Polypropylene - Back Side: Opaque Silver Metallic
- Adhesive:
Proprietary Long-Term Removable
Repositionable Reusable - Liner: Clear PET – 5 mil (125µ +/-10µ)
- Film Thickness: 3 mil (75µ +/-10µ)
- FR Certification: Not Tested
- Face Film:
- Durability
- Interior: Up to 4 years
- Exterior:
Up to 3 Years - Vertical Exposure
under Normal Conditions. - Environment: Humidity & Solvent Resistance – Good
- Shelf Life: 1 Year
- Storage Requirements: Store at 59°F to 68°F (+15°C to +20°C) and Relative Humidity between 45% to 70%
- Repositionable: Yes - Highly
- Application/Removal
- Application Temp: +50°F to +86°F (+10°C to +30°C)
- Service Temp: +0°F to +122°F (-17°C to +50°C)
- Removability:
Cleanly Removable with No Adhesive
Residue - Adhesion May Increase
Depending on Surface and Length of Time - Removal Temp: +50°F (+10°C) or Greater
- Exclusions:
NOT to be Applied to PVC, Copper, or
Unpainted Metal, as the Application
May Become Permanent
Product Reviews
Write Your Own Review
