This adjustable slitter shaft assembly is specifically designed for Baum 714XLT and 714XA folders. It enable micro-perforating of sheets by adjusting the fine tooth blade depth into the paper stocks. The new, optional cartridge slitter shaft design can be installed in place of the existing fixed center distance slitter shafts. This adjustable slitter shaft assembly can be added to Baum 714XLT and 714XA folders but cannot be added to 714 right angle folders.
Product Details
Product Type: Adjustable Slitter
Compatible Equipment: Baum 714XLT Folder Models
Quantity: 1PK
Demonstration Video
BAUM 714XLT Basic Operation
Transcript :
Today we will be demonstrating the Baum 714XLT Table Top Folder. We'll be using a standard 8 1/2 by 11 20lb copier paper and will be letter folding it. I went ahead and adjusted pan one and pan two to accommodate the letter form of the 8 1/2 by 11, I got the adjustments that I needed from the chart provided on the exit table of the 714 XLT, here it shows you exactly what position you need to move the first and second pan into to allow for the fold that you want to achieve using the size of paper that you have. There's a gap set on the top here that allows the paper flow through underneath, yo ...
Today we will be demonstrating the Baum 714XLT Table Top Folder. We'll be using a standard 8 1/2 by 11 20lb copier paper and will be letter folding it. I went ahead and adjusted pan one and pan two to accommodate the letter form of the 8 1/2 by 11, I got the adjustments that I needed from the chart provided on the exit table of the 714 XLT, here it shows you exactly what position you need to move the first and second pan into to allow for the fold that you want to achieve using the size of paper that you have. There's a gap set on the top here that allows the paper flow through underneath, you have a variable speed control, account display, you have a switch turning on the rollers, and then you have a switch that turns on the pump that allows the sheets to be fed through. Rollers are on, the finished product comes out shingled nicely on the exit tray conveyor there and as you can see 8 ½ by 11 comes out perfect with your standard letter fold.
