The Drytac Dry Mount Film is a dry mounting tissue for mounting irregular surfaces. This Dry Mount Film Mounting Tissue is a thin PVC carrier, coated on both sides with an acrylic heat-activated adhesive. Each side of the film is protected by a high quality moisture stable paper release liner. When the film is ready for use, the release paper is removed, exposing a low initial tack adhesive allowing positioning of a print without the use of a tacking iron. The print can then be repositioned at any time prior to inserting into a heated press. this Dry Mount Film is ideal for mounting to canvas, heavily grained or textured substrates, and most other irregular surfaces like most metals.
Product Details
Film Length: 82' - 328'
Film Width: 41" - 51"
Film Thickness: 50µ (2 mil)
Release Liner: 1 Side PE Coated Bleached Kraft Grey Grid Paper (Moisture Stable)
Dry Mount Film is a 2 mil (50µ) plasticized clear PVC film, coated on both sides with a heat-activated solvent acrylic adhesive that is protected on both sides by a bleached Kraft gridded release paper coated on one side with siliconized PE.
Typical Applications
Suitable for mounting to canvas, heavily grained or textured substrates and irregular surfaces, such as most metals.
Product Structure
Release Liner
1 Side PE Coated Bleached Kraft Grid Paper (Moisture Stable)
Adhesive
Solvent Acrylic (Heat Activated)
Film
Clear PVC
Physical Characteristics
Film Thickness
2 mil (50µ)
Adhesive Layer
1 mil (25µ) on each side
Film/Adhesive Ratio
1:2:1
UV Protection Factor
Not Applicable
Outdoor Durability
Not Applicable
Service Temperature Range
-4°F to 203°F (-20°C to 95°C)
Peel Strength (20 min, FTM1)
18 N/25mm
Shelf Life
Use within 1 year after opening original box
Storage Conditions
59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity
