Interlam Pro Emerytex UV 5mil PS Laminating Film
131.29 399.39 5

Interlam Pro Emerytex UV 5mil PS Laminating Film

Brand: Drytac
  • Matte PVC overlaminates with a pebble texture finish
  • Film Width: 25.5"
  • Film Thickness: 5 mil
  • Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)
  • Ships Free Over $75
Starting At


Choose Product Below

  • 0
  • 1

Product Description

Interlam Emerytex UV 5.0 is a non-glare, scuff-resistant PVC (vinyl) overlaminating film coated with a pressure-sensitive, aqueous acrylic adhesive. Its scuff-resistant, pebble texture finish renders it suitable for graphics where extensive handling may be involved. It offers UV protection for indoor for indoor and short-term outdoor graphics. Interlam Emerytex is ideal for laminating graphics displayed in high-traffic areas. This film is suitable for trade show graphics, POP displays, mouse pads, counter mats, event signage and other signage where a scuff resistant finish is required and cost is a key factor. However, this film is not recommended for floor graphic applications.

Product Details


  • Matte PVC overlaminates with a pebble texture finish
  • Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)


  • Anti-slip properties make it suitable for floor graphics
  • Recommended for use in medium to high traffic indoor display areas
  • Ideal for tradeshow graphics, POP displays or event signage
  • Low Slip Potential Rating according to EN 13036-4

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Item Specifications

  • Film Length: 38" - 61"
  • Film Width: 150' - 300'
  • Finish: Pebble textured matte
  • Base Film: 4.0 mil (100 micron) PVC (vinyl)
  • Adhesive layer: 1.0 mil aqueous acrylic
  • Release Liner: Moisture stable paper
  • Initial Tack: High
  • Application Speed: 1' - 6' per minute
  • Application Temperature: Room Temperature - 120 F
  • Coefficient of Friction:Dry condition 0.83/ ASTM


Part NumberWidthLengthThicknessFinish
ILT3816438"164'5 milPebble textured matte
ILT5116451"164'5 milPebble textured matte
ILT6116461"164'5 milPebble textured matte

Technical Data

Interlam Pro Emerytex is a 4 mil (100µ) monomeric soft calendared PVC laminating film with a matte pebble textured finish, coated on one side with a pressure sensitive acrylic adhesive that is protected by a bleached Kraft release paper coated on both sides with PE and siliconized on the release side. Interlam Pro Emerytex has been tested according to the EN 13036-4 test method and awarded a rating of low slip potential.

Typical Applications
  • Recommended for laminating mounted prints that will be placed in high traffi c indoor and outdoor display areas.
  • Provides UV protection for outdoor graphics.
  • Ideal for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff -resistant finish is required.
  • Can be combined with Drytac’s FloorTac print media to create a slip-resistant fl oor graphic for low to mid-traffic areas (up to 6 months).

Product Structure

Film Matte Pebble Textured Monomeric Soft Calendared PVC
Adhesive Acrylic (Pressure Sensitive)
Release Liner 2 Side PE Coated, 1 Side Siliconized Kraft

Physical Characteristics

Film Thickness 4 mil (100µ)
Adhesive Layer 1 mil (25µ)
Film/Adhesive Ratio 4:1
UV Protection Factor Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image
Outdoor Durability 3 years
Service Temperature Range -13°F to 302°F (-25°C to 150°C)
Peel Strength (20 min, FTM1) 11 N/25mm
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity

Process Settings

Equipment Type Temperature Speed
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Downloadable Information

Questions & Answers

Submit a New Question