SealerSales Replacement Kit for W-300A Automatic Impulse Sealer
15.79
NewCondition
InStock
SealerSales Replacement Kit for W-300A Automatic Impulse Sealer
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
Product Description
This replacement kit is for use with SealerSales W-300A Automatic Impulse Sealer. Replacement Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, and 1ft. long roll of PTFE cover.
Note: We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.
Note: We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.
Product Details
- Kit Includes: (2) 2.7mm wide heating element, (2) 1/2" PTFE adhesive, and 1 ft. long roll of PTFE cover.
- For Use With: 12" W-Series Automatic Impulse Sealer w/ 2.7mm Seal Width
- Quantity: 1 Set
- Part Number: RK-12A-W-300A
