Trimount 8.5" x 11" is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185 DegreesF (85 DegreesC). Trimount is suitable for use in all makes of dry mounting presses. Trimount is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market. Get 8.5" x 11" of 3.0 mil Trimount Dry Mounting Tissue with every order. Product number TR3207.
Trimount is a 2.6 mil (65µ) pH-neutral white mounting tissue, coated on both sides with a heat-activated solvent acrylic adhesive that is tack-free at normal ambient temperature and does not require a release liner.
Typical Applications
For use in all types of dry mounting presses.
Recommended for bonding resin-coated photographic paper and printed materials to smooth surfaces.
Product Structure
Adhesive
Solvent Acrylic (Heat Activated)
Film
Off White Kraft Paper
Adhesive
Solvent Acrylic (Heat Activated)
Physical Characteristics
Film Thickness
2.6 mil (65µ)
Adhesive Layer
0.5 mil (12µ) on each side
Film/Adhesive Ratio
0.5:2.6:0.5
UV Protection Factor
Not Applicable
Outdoor Durability
Not Applicable
Service Temperature Range
-4°F to 203°F (-20°C to 95°C)
Shelf Life
Use within 1 year after opening original box
Storage Conditions
59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity
Thank you for your question. The Trimount Dry Mounting Tissue Sheets actually come in a package and not on roll, the picture is stock image provided by the manufacturer. We apologize for the confusion.
Thank you for your question. Unfortunately you would not be able to use the a roll laminator but would work with a pouch or board laminator that gets to the proper temperature.
