Our high quality 10mil 2-15/16" x 4-1/8" jumbo card size laminating pouches with short side slot help to improve the value of all printed materials. They enhance colors by turning dull prints into bright lustrous colors, help to prolong the life of printed materials and preserves them and protect them from outside elements. All of our 10mil 2-15/16" x 4-1/8" pouches with short side slot include one carrier per box. These pouches have superb clarity and offer exceptional value for reasonable prices. Plus, we now offer laminating pouches with prepunched slots to help you make name tags, luggage tags, name badges and ID cards in just seconds. Product number SSLTLP10JUMBO.
Item Specifications
Size: Jumbo Card Size
Dimensions: 2-15/16" x 4-1/8"
Thickness: 10mil
Slot Size: 1/8" x 1/2"
Slot Location: Short Side
Quantity: 100 Pieces
Corners: Round (1/8" radius)
Part Number: SSLTLP10JUMBO
Demonstration Video
Understanding How to Use Laminating Pouches Video
Transcript :
This is How to Use Laminating Pouches!
First off, make sure your project fits inside the pouch and does not extrude past the edges. The pouch should always be bigger than your page.Next, when choosing a size, make sure your pouch laminator is big enough and can handle the pouch thickness because we sell some pretty big pouches. Pouches come in thicknesses of 3 to 10 mil, but not every size comes in every thickness. All laminating pouches have rounded corners, And you can find some with prepunch side slots. Using a lamination pouch is simple: First open your pouch and insert your project, alig ...
This is How to Use Laminating Pouches!
First off, make sure your project fits inside the pouch and does not extrude past the edges. The pouch should always be bigger than your page.Next, when choosing a size, make sure your pouch laminator is big enough and can handle the pouch thickness because we sell some pretty big pouches. Pouches come in thicknesses of 3 to 10 mil, but not every size comes in every thickness. All laminating pouches have rounded corners, And you can find some with prepunch side slots. Using a lamination pouch is simple: First open your pouch and insert your project, align all the edges so they are even. Then place the pouch into the carrier so they open the same way. The edge where the two sides meet is called the crease. Line up the carrier and pouch creases. With pouch in place, slide the carrier into your pouch laminator crease end first as seen here. When it's done, remove the carrier and unveil your beautiful new laminated project!
Recommended for you
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
