Trimount is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185 DegreesF (85 DegreesC). Trimount is suitable for use in all makes of dry mounting presses. Trimount is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market.
Product Details
Size: 8" x 10" - 16" x 20"
Carrier: Paper/off-white
Adhesive Bond: Permanent
Adhesive Base: Solvent acrylic
Initial Tack: None
Processing Temperature: 85
Specifications
Part Number
Size
Adhesive Bond
Thickness
Adhesive Base
TR3205
8" x 10"
Permanent
3 mil
Solvent acrylic
TR3207
8.5"x 11"
Permanent
3 mil
Solvent acrylic
TR3210
11" x 14"
Permanent
3 mil
Solvent acrylic
TR3215
16" x 20"
Permanent
3 mil
Solvent acrylic
Technical Data
Trimount is a 2.6 mil (65µ) pH-neutral white mounting tissue, coated on both sides with a heat-activated solvent acrylic adhesive that is tack-free at normal ambient temperature and does not require a release liner.
Typical Applications
For use in all types of dry mounting presses.
Recommended for bonding resin-coated photographic paper and printed materials to smooth surfaces.
Product Structure
Adhesive
Solvent Acrylic (Heat Activated)
Film
Off White Kraft Paper
Adhesive
Solvent Acrylic (Heat Activated)
Physical Characteristics
Film Thickness
2.6 mil (65µ)
Adhesive Layer
0.5 mil (12µ) on each side
Film/Adhesive Ratio
0.5:2.6:0.5
UV Protection Factor
Not Applicable
Outdoor Durability
Not Applicable
Service Temperature Range
-4°F to 203°F (-20°C to 95°C)
Shelf Life
Use within 1 year after opening original box
Storage Conditions
59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity
Thank you for your question. The Trimount Dry Mounting Tissue Sheets actually come in a package and not on roll, the picture is stock image provided by the manufacturer. We apologize for the confusion.
Thank you for your question. Unfortunately you would not be able to use the a roll laminator but would work with a pouch or board laminator that gets to the proper temperature.
