INDEX

0. Screw, nuts, washers, to be used for folders

1. A01；Cover of the body

2. A02；Sideplate of the body

3. A10；Paper feed table

5. A12；Assembly of Lifting screw

6. A13；Assembly of Lifting motor

7. A20；Assembly of Paper guide

9. A22；Feed roller unit

10. A25；Main motor unit

11. A26；Assembly of links

12. A31；1st Folder table

13. A32；2nd Folder table

14. A40；Baseframe of the body

15. A42；Separator air control unit

16. A44；Operation switching unit

17. A50；Paper ejection table

18. A58；Paper ejection auxiliary table

19. A60；Paper suction unit

20. A65；Paper separator unit

Screw, nuts, washers, to be used for folders

Description of parts (screw,E-ring, spring pin, etc.) illustrated

• Orders for screws, washers, etc. should be given based on a minimum lot of 30 per item to facilitate shipping. (We ask that orders be given at one time for as many items as possible.)

: Round head screw (30 pcs/set)

RKSW

: Round head screw with spring washer (30 pcs/set) : Flat washer and round head screw with spring washer (30 pcs/set) : Hexagon head screw (30 pcs/set) : Countersunk head screw (30 pcs/set) : Hexagon socket set screw (30 pcs/set) : Bind screw (30 pcs/set) : Self-tapping screw (RKTP…pan head, SKTP…countersunk) (30 pcs/set) : Nut (30 pcs/set)

SW W SP

: Spring washer (30 pcs/set) : Flat washer (30 pcs/set) : Spring pin (30 pcs/set)

: E-type stopper ring (E ring) (30 pcs/set) : Tap tight screw (RKST…pan head, RKST…countersunk) (30 pcs/set) : Wave washer (30 pcs/set) : P tight screw (30 pcs/set) Cap screw (30 pcs/set)

RKWS

HB SK HS BD TP

WW RKPT

1-4mm 5mm or more 1-4mm 5mm or more

1-6mm 6mm or more

1-3mm 4mm or more 1-8mm 10mm

Example:

RKSW4×6-2 : Two round head screws with spring washer 4mm in diameter, 6mm long

RKWS4×8

: One round head screw with spring washer 4mm in diameter, 8mm long

: One hexagon socket set screw 4mm in diameter, 6mm long

N, SW4

: One each of spring washer 4mm in diameter plus nut

: One spring pin 3mm in diameter, 20mm long

: Two 4mm E rings

[Note] ・ Prices shown are unit prices for single parts. They do not include consumption tax.

Fig. No. Parts No.

Rear cover Push pull ciip Top cover 1272-0803 Error list Pulls Support plate Ejection sensor plate upper Static electric exclusion brush（L120） Ejection sensor cover Dimple knob Luminous sensor Static electric exclusion brush（L48） Ejection control plate ASSY 1272-0518 Ejection control plate 1272-0519 Slide tape Light receiving sensor Sensor bracket Ejection side Cover A Static electric exclusion brush（L276） Ejection Sensor Plate Upper Ejection side Cover B Bottom reinforcement plate Flont cover 1272-0812 Model name plate （AeroFoldPlus） Flont cover 1272-0813 Model name plate （1800S） Paper feed tray side cover F roller holder

Fig. No. Parts No.

Fig. No. Parts No.

Side plate L Clutch unit ASSY

Spacer Push pull ciip Spacer Spacer Slide hinge Slide rail Lever center POM Spacer 1 table guide right Table pin Paper ejection table pin Tie bar 380 1 table guide left Plate screw nut Micro switch Folder press control L Dimple knob Spacer Folder press control R Table pin Lever center 1Table receptacle Table connector reentrant mounting plate 2Table guide R L bracket(A) L bracket(B) Hexagon spacer Micro switch Sensor bracket 2Table receptacle Connector mounting plate(B) Lead micro switch

Fig. No. Parts No.

Micro switch bracket Micro switch bracket Side cover sensor ASSY Sensor cover Side plate R Timing belt Positioning bracket 2Table guide L PCB mounting plate Main PCB 1272-7402 Control program（Ver2.56） 1272-7016 sub chip 1272-7017 Sub Control program（Ver1.01） Assembly of Lifting screw Assembly of Lifting motor Separator air control unit Operation switching unit

Fig. No. Parts No.

1272-0131 0260-7050 0260-7060 1272-0116 0260-2120 1272-0101 4147-1073 1262-0108 Hexagon cap nut 1272-0133 1262-9055 1272-0154 1272-1103 Flat washer Hexagon nut 1272-0155

Paper holder Ｂ Paper guide left ASSY Lock shaft Knob Plate Paper guide right ASSY Slide tape right Shim Table bracket Gear rack Rack gear guide Plate nut Guide shaft Guide block ASSY Reflection sensor Case of inch Sensor cover Paper detection PCB mm Assy Paper detection PCB inch Assy Photo sensor lever Guide gear Paper feed table ASSY Collar Tension Spring N3 Slide tape left Compression Spring Holder plate Spacer W3 N3 Paper holder A

Fig. No. Parts No.

Bind screw BD4x6 Countersunk head screwSK3x20 Countersunk head screwSK3x6 Round head screw RKSW3x6

Fig. No. Parts No.

1272-0434 1262-0129 1272-1106 1272-0127 1272-0162 1272-0110 Spring pin 1272-0135 1272-1104 1272-0121 1272-0122 1272-0161 1272-0130 1272-0417 1272-0129 1272-0128 1272-0123 1272-1111 1272-1101 0260-7100A 1272-0104 Hexagon nut 1272-0134

Cover of the lift Knob Spacer Screw shaft Reinforcement frame rear Slide tape SP2x12 Safety cover L POM Spacer Table hinge Table hinge nut Reinforcement frame front Lift table frame Tie bar 364 Harness holder Plate for harness Bracket Lead screw nut Spacer Bearing with flange Guide pin N4 Safety cover R

Hexagon nut Bind screw Round head screw Round head screw Round head screw

N3 BD4x6 RKWS3x20 RKWS3x8 RKWS3x6

Fig. No. Parts No.

Fig. No. Parts No.

1272-0126 Round head screw 1272-1107 1777-0313 1777-1108 1272-0124 0911-2118

Lead screw RKSW3x35 Pipe spacer Timing pulley Polyslider spacer Bearing bracket Bearing with flange

Fig. No. Parts No.

Fig. No. Parts No.

Lifting motor ASSY Motor plate Timing pulley Idler bracket Idler pulley Bearing Tension shaft

Fig. No. Parts No.

Round head screw Round head screw Round head screw

RKWS4x20 RKSW4x30 RKWS4x10

Fig. No. Parts No.

Ultra sensor bracket Hexagon spacer Sensor cover Reception ultrasonic sensor ASSY Sensor holder Paper guide upper Static electric exclusion brush（L82） Paper guide bracket R Reinforcement plate Transmission ultrasonic sensor ASSY Reflective sensor Paper guide bracket L Paper guide under

Fig. No. Parts No.

Fig. No. Parts No.

F Roller tension Spring Interceptor holder Assy L 0260-1320 F Roller holder (L) 5147-0302 Bearing 0260-1180 F Roller holder Static electric exclusion brush（L330） Interceptor Paper feed roller（B) Tension Spring Interceptor hinge Assy 1262-0238 Interceptor hinge 1262-0239 Hinge collar Interceptor holder Assy R 0260-1310 F Rolelr holder (R) 5147-0302 Bearing 0260-1180 F Roller holder F Roller holder center

Fig. No. Parts No.

Fig. No. Parts No.

Driven fold roller holder R 1272-0233 Driven fold roller holder 1262-0232 Driven fold roller holder boss 5149-0651 Sintered metal 1262-0230 Lever center 1262-0205 Paper feed roller（A) 0260-7110 Bearing with flange 4147-0103 Tension shaft C 5262-0520 Set collar 5147-0304 Bearing 4147-0105 Idler pulley 0264-0032 Center roller use drive timing pulley 1262-9100 Idler shaft 0260-1100 Plate bearing strap 1272-0202 Idler shaft holder 5262-0504 Timing belt 5262-0503 Timing belt Spring pin SP4x30 1272-0222 Folder press control L 1262-0224 Driven feed spring 1272-0204 Plate bearing strap R 1272-0234 Driven fold roller holder L 1272-0233 Driven fold roller holder 1262-0232 Driven fold roller holder boss 5149-0651 Sintered metal 1272-0449 Unlink bracket L 4149-0085 Lever center 1272-0210 Helical gear 1262-0204 Paper feed roller（CD) 1262-0211 Paper feed roller（E) Assy 1262-0206 Paper feed roller（E) 0051-0090A Bearing 1262-0202 Paper feed roller（B)

Fig. No. Parts No.

Dimple knob Spacer Folder press control R Unlink bracket R

Interceptor unit Main motor unit Assembly of links

Fig. No. Parts No.

Timing pulley Motor Bracket Main motor ASSY Photo sensor mounting plate Disk plate Built-in photo sensor Holder(B)

Fig. No. Parts No.

Fig. No. Parts No.

Bearing Polyslider spacer Spacer Lever center Maintenance link L Maintenance link R Folder press link

Hexagon nut N3 Countersunk head screwSK3x12 Round head screw RKSW3x12

Fig. No. Parts No.

Fig. No. Parts No.

1st Folder table harness ASSY 1272-1305 DC motor 1262-0386 Table connector convex mounting plate 1262-0387 Table connector cover 1272-0315 1st Folder table upper cover 1262-0407 2nd Table PCB cover 0260-4200 Stopper board mounting plate Missing number 0260-4120 Stopper shutter 0260-4540 Stopper screw flange 0260-4110 Stopper screw gear 0260-4180 Timing belt 0146-9540 Sintered metal 1262-0369 Screw shaft thrust washer 1262-7307 Polyslider spacer Retaining ring-E E5 1272-0316 1st Folder table rear cover Hexagon nut N3 0260-4140 Shaft idler center 0260-4150 Idler pulley 0260-4190 Motor pulley 0260-4160 Idler puller washer 0260-4130 Screw driving motor mounting plate Missing number 1262-0415 Table hook lever collar 1165-0121 Disk spring 1262-0319 Table hook lever right 1222-6009 Spacer 1262-0353 1/2 Table guide left 1262-0344 Table screw nut 1272-0306 1st Table guide shaft 1262-0310 1st Table lead screw 0020-0790 Guide bushing Retaining ring-E E4 1272-0321 1st Folder table under cover 1262-0304 Grommets

Fig. No. Parts No.

1272-0309 Reinforcement table 0020-4250 Lead micro switch 1262-0370 Stopper situs limit switch mounting Missing number 1272-0037 Slider block Assy 1262-9118 Slider block 0070-5000 Sintered metal 1262-0349 Stopper dock 1262-0371 Stopper cushion rubber 1262-0315 Push plate 5262-0528 Push pull ciip 1262-0303 Stopper plate 1272-0302 1st Folder table under 1262-0324 1/2 Table guide right 1262-0348 Table hook lever left 1272-0301 1st Folder table upper

Fig. No. Parts No.

1272-0304 2nd Folder table under 1272-0303 2nd Folder table upper 1262-0371 Stopper cushion rubber 5262-0528 Push pull ciip 1262-0303 Stopper plate 0145-4120 Bearing 0162-4770 Grommets Low head screw Low head M3x15 Hexagon cap nut N6 Flat washer W6 1272-1302 Spacer 1272-0311 Locating washer Countersunk screw M6(D10)x15 1262-0311 2nd Table lead screw 1262-9117 2nd Table guide shaft Missing number 1272-0037 Slider block Assy 1262-9118 Slider block 0070-5000 Sintered metal 1262-0349 Stopper dock 1262-0344 Table screw nut 1262-0370 Stopper situs limit switch mounting 0020-4250 Lead micro switch 0020-0790 Guide bushing Retaining ring-E E4 1262-0304 Grommets 1272-0309 Reinforcement table 1272-0320 2nd Folder table under cover2 Retaining ring-E E5 0260-4190 Motor pulley 0260-4160 Idler puller washer 0260-4180 Timing belt 0260-4150 Idler pulley 0260-4140 Shaft idler center Hexagon nut N3

Fig. No. Parts No.

1262-0369 0146-9540 0260-4110 0260-4540 0260-4120 1262-0407 Missing number 5262-0532 1262-0372 Spring pin Missing number 0260-4130

Screw shaft thrust washer Sintered metal Stopper screw gear Stopper screw flange Stopper shutter 2nd Table PCB cover

Spacer 2nd Table stopper PCB stand φ2.5×10

Screw driving motor mounting plate

2nd Folder table harness ASSY 1272-1305 DC motor

Fig. No. Parts No.

Slide tape Belt cover Belt cover frame SMPS Spacer Noise filter Protector 3.15A Protector 5A PHDR16/22 Harness Power switch Connector plate Base plate Rubber foot

Fig. No. Parts No.

Fig. No. Parts No.

5262-0507 5262-0506 Retaining ring-E Disk spring 1272-0452 1272-0450 1262-7302 1262-0066 Spring pin 1272-0802

Mold knob cap Mold knob E4 φ6 Shaft clamp plate Shaft Polyslider spacer Gear φ2x12 Label

Fig. No. Parts No.

Fig. No. Parts No.

Key label Key PCB plate Start key Test key Key switch ring Spacer Key PCB Assy 1272-7004 Key PCB 1262-0458 Smoke film 1272-7018 Key chip 1272-7019 Key Control program（Ver1.01）

Fig. No. Parts No.

Fig. No. Parts No.

Paper ejection belt feed motor Assy 1272-1501 Paper ejection belt feed motor 1262-0553 Motor Bracket 1262-0557 Joint 1262-0555 Pulley shaft holder R 0145-4170 Sintered metal Spring pin φ3x20 0260-3020 Lower paper ejection roller 1262-0556 Drive shaft 1262-0513 Paper ejection belt 1272-0551 Ejection roller shaft Retaining ring-E E9 1272-0552 Paper ejection roller 1262-0554 Pulley shaft holder left 1272-0501 Paper ejection table mounting plate left 1262-0560 Ejection roller lever left 1272-0505 Shaft holder left 0145-4170 Sintered metal 1272-1504 Spur gear 1272-0507 Belt roller shaft 1272-0506 Shaft holder right 1272-0512 Cover plate 1272-0503 Paper ejection table 1272-0504 Paper ejection table cover 1262-0542 Spacer 3272-7124 Roller drive motor Assy 1272-1502 Roller drive motor 1272-0508 Lever drive motor holder 1262-0571 Micro switch 1272-0056 Roller position drive arm Assy 1262-0564 Motor arm 0260-2240 Boss arm 1262-0565 Circular pin 0146-9540 Sintered metal 1262-0566 Revolution link Retaining ring-E E5 1262-0562 Circular pin A

Fig. No. Parts No.

1262-0559 0260-9180 1272-0502 Retaining ring-E 0145-4170 1262-0558

Ejection roller lever right Grommets Paper ejection table mounting plate right E8 Sintered metal Circular shaft

Paper ejection table harness Assy

Fig. No. Parts No.

Paper ejection auxiliary table Slide tape Push pull ciip Table hook R Table hook L

Fig. No. Parts No.

Fig. No. Parts No.

1262-0045 Coupler 1272-0636 Pulley B 1262-0013 Paper feed hole belt 1272-0613 Trans shaft 1272-0605 Cover plate 8710-0580 Sintered metal 1272-0609 Belt guide A 1272-0610 Belt guide B 1272-0618 Center pulley bracket Spring pin φ3×10 1262-0047 Static electric exclusion brush（L75） 1272-0619 Center pulley guide 1272-0634 Incline adjustment center 1272-0635 Crown roller 1262-9011 Tension spring 1262-9009 Incline adjustment shaft 1262-0105 Knob 4149-0141 Separator weight 1262-0044 Center pulley 1262-0056 Compression Spring 0145-1170 POM Bearing A 1262-7303 Polyslider spacer Retaining ring-E E4 0145-4170 Sintered metal 1262-7310 Polyslider spacer Retaining ring-E E8 1262-0014 Drive shaft A Flat washer W8 0145-2330 Drive shaft spring 8900-2726 Clutch spacer washer 0146-4450 Bearing Retaining ring-E E6 1262-7145 Solenoid unit Assy 5262-0502 Solenoid 0100-5620 Socket contact 0100-5610 Plug housing 1262-0048 Rejection paper guide installation board 1262-0024 Link plate (D) 1272-0607 Solenoid mounting plate 1262-9070 Dimple knob 1272-0627 Wiring duct 1262-0021 Shaft 1262-0015 Link (B) 1262-0033 Collar

Fig. No. Parts No.

1265-0110 9262-9002 1263-0041 1262-0023 0146-9540 Flat washer 1272-0628 1272-0630 1272-0601 1272-0602 1272-7129

Pipe spacer Tension spring Pipe spacer Link plate © Sintered metal W6 Plate washer Suction duct part A Suction duct under part Suction duct upper part Suction fan motor Assy 0100-5620 Socket contact 0100-5610 Plug housing 1272-0611 Suction air contol shutter 1272-0632 Suction shutter B 1272-0631 Suction shutter A 1272-0603 Belt holder 1272-0606 Suction chamber Retaining ring-E E4 5262-0523 Oilless Bush 1272-0604 Actuator 1262-0701 Shaft 0260-7780 Built-in photo sensor Round head screw RKSW3x20 1272-0608 Weight arm 1264-0013 Rubber bush 1272-0626 Suction unit mounting plate 1272-0617 Sensor cover 1272-0616 Sensor bracket 1272-0615 Plate nut 1272-0612 Sensor bracket mounting plate 1777-1312 Spacer 1265-0217 Stainless shaft 1262-7306 Polyslider spacer 1272-0633 Mounting plate 1265-0209 Control screw 1265-0208 Control nut Retaining ring-E E8 1262-0049 Low head screw M2.5 5148-0444 Bearing 1262-0043 Center shaft 1777-0257 Compression Spring

Fig. No. Parts No.

Damper guide(A) Hexagon spacer Separator suhtter Spacer Separator duct B Assy Separator duct cover Separator duct Separator fan motor Assy 0100-5620 Socket contact 0100-5610 Plug housing 1777-1405 Spacer Hexagon cap nut N4 Flat washer W4 1262-0056 Compression Spring 5262-0529 Hexagon spacer 4148-0192 Control Pin 1272-0625 Front guide 1272-0624 Separator mounting plate 1272-0638 Separator rubber plate Countersunk head screw SK3x6

Fig. No. Parts No.