Akiles Megabind 1E Electric Legal Size Comb Binding Machine Instruction Manual, page 1

Page 1 of 3

Akiles Megabind 1E Electric Legal Size Comb Binding Machine Instruction Manual, page 2
Text on page 2

MEGABIND-1 E OPERATION INSTRUCTIONS

INTRODUCTION

Congratulations on the purchase of your new MEGABIND-1 E, a professional and heavy duty comb punch and binding machine. Your MEGABIND-1E was carefully designed with a full range of functions and premium quality components to guarantee an effortless and professional bind, as well as many years of trouble free service.

IMPORTANT

We recommend that you take a few minutes to familiarize yourself with the functions of your new MEGABIND-1 E. You will find that with just a little practice, anyone can achieve professional results.

FEATURES

Control (Not Shown .

  • \ti \ti I 111111111111 lit t d_ Die Disengageable Pins

Punching Margin Control

ASSEMBLY

  1. Place your new MEGABIND-1 E on top of a sturdy working table.
  2. Remove the screw from binding axle. Insert the Binding Handle, in a vertical position, onto the binding axle and tighten back the screw into the punching axle (make sure screw is well fastened clockwise).
  3. Insert the foot pedal plug into the rear left of the machine.
  4. Insert the power cord plug into the rear right of the machine.
  5. Make sure the punch throat is clear of any packaging material, turn on the power switch in the rear of the machine, and press foot pedal to test punching.

SAFETY INSTRUCTIONS

  1. Keep fingers, hair, jewelry, necktie and any loose clothing or objects away from the punch throat.
  2. Do not allow children to operate the machine. The MEGABIND-1 E is not a toy.
  3. Always turn switch-off and place foot pedal out of reach when machine is not in use.
  4. To reduce the risk of electric shock, never operate the MEGABIND-1E near water.

Page 2 of 3

Akiles Megabind 1E Electric Legal Size Comb Binding Machine Instruction Manual, page 3

Page 3 of 3 · End of manual

Quick start

  1. Place the Megabind-1E on a sturdy work table.
  2. Remove the screw from the binding axle, insert the binding handle in a vertical position, and tighten the screw back in clockwise.
  3. Plug the foot pedal into the rear left of the machine.
  4. Plug the power cord into the rear right of the machine.
  5. Make sure the punch throat is clear of packaging, turn on the power switch at the rear, and press the foot pedal to test punching.

Frequently asked questions

How does the Megabind-1E punch?

It is an electric punch activated by a foot pedal that plugs into the rear left of the machine (page 2).

Where do the foot pedal and power cord connect?

The foot pedal plugs into the rear left and the power cord into the rear right of the machine (page 2).

What should I do when the machine is not in use?

Always turn the switch off and place the foot pedal out of reach. Never operate the machine near water (page 2).