Page 1 of 3
Text on page 2
OPERATION MANUAL
INTRODUCTION
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW
, A MODERN, PRACTICAL AND RELIABLE
PUNCH AND BINDING EQUIPMENT. YOUR
WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS TO GUARANTEE AN EFFORTLESS AND EASY BIND, AS WELL AS MANY YEARS OF TROUBLE- FREE SERVICE.
IMPORTANT
WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH THE FUNCTIONS OF
YOUR NEW
. YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANYONE CAN ACHIEVE PROFESSIONAL RESULTS.
FEATURES
WARRANTY
YOUR HAS A WARRANTY OF ONE YEAR, FROM ITS PURCHASE DATE. IN THE EVENT OF A MANUFACTURER ' S DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT. IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISTREATMENT OF THE UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE, WHETHER IT IS REVERSIBLE OR NOT.
IF THE
IS NOT OPERATING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS PROVIDED. IF THE PROBLEM PERSISTS, PLEASE CONTACT YOUR DEALER FOR FURTHER INSTRUCTIONS. PLEASE HAVE YOUR MACHINE ' S SERIAL NUMBER AND THE PURCHASE DATE READY. IF THE MACHINE MUST BE RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO PROPERLY PACK AND SHIP IT, AS ANY DAMAGE S INCURRED DURING ITS TRANSPORTATION IS NOT COVERED BY OUR WARRANTY POLICY.
Page 2 of 3
Text on page 3
ASSEMBLY
Your comes fully assembled. Simply place it on top of a sturdy work table and you are ready to work.
PUNCHING
- Move (align) Side Margin Guide to proper sheet & cover size. See Picture 1.
- Insert sheets and pull handle forward to punch. See Picture 2.
- Return Punch handle to its upright position. See Picture 3.
- Repeat steps two and three as needed.
TIPS:
- Maximum single punching: 10 sheets of 20 lbs. paper
- Comfortable single punching: 8-10 sheets of 20 lbs. paper.
COIL INSERTING ( BINDING)
- Insert coil into first three or four holes.
- Place your punched document onto Coil Inserting Table and finish inserting coil by sliding
hand. See picture 2
3 Use a set of pliers to cut-off any excess coil and bend. Make sure you bend-in both coil ends.
This procedure will avoid document from unbinding itself. See picture 3
Page 3 of 3 · End of manual
Quick start
- Place the machine on a sturdy work table; it comes fully assembled.
- Align the side margin guide to the sheet and cover size.
- Insert sheets, pull the handle forward to punch, then return it upright. Repeat as needed.
- Insert the coil into the first three or four holes.
- Place the document on the coil inserting table and slide your hand to finish inserting the coil.
- Cut off excess coil with pliers and bend in both ends.
Frequently asked questions
How many sheets can the RubiCoil punch at once?
Up to 10 sheets of 20 lb paper; 8–10 sheets is the comfortable range. See page 3.
How do I keep the coil from coming off?
Cut off excess coil with pliers and bend in both coil ends. See page 3.
What warranty does the RubiCoil have?
One year from the purchase date against manufacturer defects. Damage from improper use is not covered. See page 2.
