Page 1 of 3
Text on page 2
OPERATION MANUAL
INTRODUCTION
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW
, A MODERN, PRACTICAL AND RELIABLE
PUNCH AND BINDING EQUIPMENT. YOUR
WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS TO GUARANTEE AN EFFORTLESS AND EASY BIND, AS WELL AS MANY YEARS OF TROUBLE- FREE SERVICE.
IMPORTANT
WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH THE FUNCTIONS OF
YOUR NEW
. YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANYONE CAN ACHIEVE PROFESSIONAL RESULTS.
FEATURES
WARRANTY
YOUR HAS A WARRANTY OF ONE YEAR, FROM ITS PURCHASE DATE. IN THE EVENT OF A ' MANUFACTURER S DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT. IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISTREATMENT OF THE UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE, WHETHER IT IS REVERSIBLE OR NOT.
IF THE
IS NOT OPERATING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS PROVIDED. IF THE PROBLEM PERSISTS, PLEASE CONTACT YOUR DEALER FOR FURTHER INSTRUCTIONS. PLEASE HAVE YOUR MACHINE ' S SERIAL NUMBER AND THE PURCHASE DATE READY. IF THE MACHINE MUST BE RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO PROPERLY PACK AND SHIP IT, AS ANY DAMAGE S INCURRED DURING ITS TRANSPORTATION IS NOT COVERED BY OUR WARRANTY POLICY.
Page 2 of 3
Text on page 3
ASSEMBLY
Your comes fully assembled. Simply place it on top of a sturdy work table and you are ready to work.
PUNCHING
- Move (align) Side Margin Guide to proper sheet & cover size. See Picture 1.
- Insert sheets and pull handle forward to punch. See Picture 2.
- Return Punch handle to its upright position. See Picture 3.
- Repeat steps two and three as needed.
TIPS:
- Maximum single punching: 10 sheets of 20 lbs. paper
- Comfortable single punching: 8-10 sheets of 20 lbs. paper.
COIL INSERTING ( BINDING)
- Insert coil into first three or four holes.
- Place your punched document onto Coil Inserting Table and finish inserting coil by sliding
hand. See picture 2
3 Use a set of pliers to cut-off any excess coil and bend. Make sure you bend-in both coil ends.
This procedure will avoid document from unbinding itself. See picture 3
Page 3 of 3 · End of manual
Quick start
- Place the machine on a sturdy work table; it comes fully assembled.
- Align the side margin guide to your sheet and cover size.
- Insert up to 10 sheets of 20 lb paper and pull the handle forward to punch, then return it upright. Repeat as needed.
- Thread the coil into the first three or four holes.
- Place the document on the coil inserting table and slide by hand to finish inserting the coil.
- Cut off excess coil with pliers and bend in both ends so the document can't unbind.
Troubleshooting
| Problem | Likely cause | Fix (from the manual) |
|---|---|---|
| Punch jams or is hard to pull when punching | Too many sheets in one punch. | Punch no more than 10 sheets of 20 lb paper at once. 8 to 10 sheets is comfortable. Page 3 |
| Holes are not placed right on the sheet | The side margin guide is not set for the sheet and cover size. | Move the side margin guide to the proper sheet and cover size before punching. Page 3 |
| Punch handle does not reset | The handle was left forward after punching. | Return the punch handle to its upright position, then repeat as needed. Page 3 |
| Bound document comes unbound | The coil ends were not bent in. | Cut off excess coil with pliers and bend in both coil ends. Page 3 |
| Coil will not go in all the way | The coil was not started correctly. | Insert the coil into the first three or four holes, put the punched document on the Coil Inserting Table and slide the coil in by hand. Page 3 |
| Machine is not working properly | A fault in the machine. | Follow the corrective actions first. If the problem continues, contact your dealer with the serial number and purchase date ready. Page 2 |
Frequently asked questions
How many sheets can the RubiCoil punch at once?
Up to 10 sheets of 20 lb paper; 8–10 sheets is comfortable (page 3).
Does it need assembly?
No. It comes fully assembled (page 3).
How do I finish the coil ends?
Use pliers to cut off excess coil and bend in both ends to keep the document from unbinding (page 3).
What is the warranty?
One year from purchase against manufacturer defects; damage from misuse is not covered (page 2).
