Page 1 of 9
Page 2 of 9
Text on page 3
WOW
Xtra Long Presentation Cart
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
We recommend that you assemble this unit on a table.
24HOURS 7 DAYS A WEEK
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
Page 3 of 9
Text on page 4
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
1.) Identify and Separate all the Parts and Hardware.
2.) Place the LCD Platform (P-3) with the insert nuts facing up. Attach 1 Right Leg Assembly (P-1) and 1 Left Leg Assembly (P-2) using 4 each (A) screws. (Finger tighten only)
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258
3.) Attach Stability Panel (P-7) to Right & Left Leg Assemblies (P-1 & P-2) using 4 (A) Screws as shown in illustration #1. (Finger tighten only)
Page 4 of 9
Text on page 5
4.) Align 4 each Angle Brackets (P-8) with the edge of the Middle Shelf (P-6) and attach using 4 each (A) Screws as shown in illustration #2. (Finger tighten only)
5.) Attach Right Shelf Bracket (P-9) and
Left Shelf Bracket (P-10) to Laptop Shelf (P-4) using 4 Flat Head screws (A) as shown in illustration # 4.
Page 5 of 9
Text on page 6
6.) Attach Lower Shelf (P-5) to the Right & Left Leg Assemblies (P1 & P2) using 4 each (B) screws as shown in illustration # 4. (Finger tighten only)
7.) Attach 2 Locking Casters (D-1) to the front of the unit. Attach 2 Casters (D-2) to the back of the unit. Tighten all Casters using Caster Wrench (G).
8.) Slide Middle Shelf (P-6) Between Right & Left Leg Assemblies (P-1 & P-2) and attach Middle Shelf (P-6) using 4 each (A) screws and 4 each (C) Square Nuts as shown in illustration # 4. Secure Middle Shelf (P-6) to Stability Panel (P-7) using two screws (A).
9.) (Tighten all the screws at this time using Allen Wrench (F)).
Page 6 of 9
Text on page 7
10.) To install Grommets (E) in LCD Platform (P-3) and Middle Shelf (P-6), separate parts and press Grommet Sleeve in rectangular openings as shown in illustration # 5.
11.) Snap 2 plastic Caps over top of Sleeve as shown in illustration # 5.
Grommet(E) installation Illustration # 5
12.)Attach Right Shelf Bracket (P-9) and Left Shelf Bracket (P-10) to the Right & Left Leg Assemblies at the desired height as shown in illustration # 5. (Tighten 4 screws under Laptop Shelf (P-4) using Allen Wrench (F)).
Important
The Balt product you have purchased is guaranteed against material and workmanship defects. This guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or implied shall apply. Failure to follow instructions found in Important Information Section of Owner Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
Page 7 of 9
Text on page 8
4 Outlet Electrical
Assembly Diagram
This 4 Outlet Electrical is Part # 66450 and must be purchased separately. Please contact our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258
Metal Bracket w/Cord Winder
1.) Identify and Separate all the Parts and Hardware.
2.) Slide Metal Bracket over the
Electrical Outlet (EL-1) as shown. (note that Metal Stop is at the end with the electrical Plug-in.)
3.) Attach Metal Bracket (EL-2) to the Right or Left Leg Assembly (P-1 or P-2) using 2 Phillips Head
Screws (EL-3) and 2 Hex Nuts (EL-4) as shown in Optional Electrical illustration.
Metal Stop
Electrical Plug-in
Optional Electrical Illustration
Page 8 of 9
Text on page 9
7 Outlet Electrical
Assembly Diagram
This 7 Outlet electrical is Part # 66572 and must be purchased separately. Please contact our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time 1-800-749-2258
Metal Bracket w/Cord Winder
1.) Identify and Separate all the Parts and Hardware.
2.) Slide Metal Bracket over the
Electrical Outlet (EL-1) as shown. (note that Metal Stop is at the end with the electrical Plug-in.)
3.) Attach Metal Bracket (EL-2) to the Right or Left Leg Assembly (P-1 or P-2) using 2 Phillips
Head Screws (EL-3) and 2 Hex Nuts (EL-4) as shown in Optional Electrical illustration.
Metal Stop
Electrical Plug-in
Optional Electrical Illustration
WWW.MYBINDING.COM
Page 9 of 9 ยท End of manual
Quick start
- Read the instructions through first, assemble on a table, and identify and separate all parts and hardware.
- Place the LCD platform (P-3) insert nuts up and attach the right and left leg assemblies (P-1, P-2) with 4 screws (A), finger tight.
- Attach the stability panel (P-7) with 4 screws (A), and fit 4 angle brackets (P-8) to the edge of the middle shelf (P-6).
- Attach the shelf brackets (P-9, P-10) to the laptop shelf (P-4), and the lower shelf (P-5) to the legs with 4 screws (B).
- Fit 2 locking casters (D-1) at the front and 2 casters (D-2) at the back and tighten with the caster wrench (G).
- Slide in the middle shelf and secure it with 4 screws (A) and 4 square nuts (C), plus two screws into the stability panel, then tighten all screws with the Allen wrench (F).
- Press the grommets (E) into the LCD platform and middle shelf, snap on the caps, and attach the laptop shelf brackets at the height you want.
Frequently asked questions
Which electrical outlets fit this cart?
The 4-outlet electrical (part #66450) and the 7-outlet electrical (part #66572) both fit and must be purchased separately. See page 8.
How do I mount the outlet strip?
Slide the metal bracket over the outlet with the metal stop at the plug-in end, then attach it to either leg with 2 Phillips head screws and 2 hex nuts. See page 8.
How often should I check the screws?
Do not use the cart unless all screws are tight, and check them at least every six months. See page 3.
What is the warranty on the Balt 27521?
Balt guarantees the product against material and workmanship defects for 1 year from the date of purchase. Shipping damage caused by carriers is not covered. See page 7.
