Page 1 of 6
Page 2 of 6
Text on page 3
Hardware List
Page 3 of 6
Text on page 4
Assembly Diagram
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
1.) Identify and Separate all the Parts and Hardware.
2.) Slide two Collars (P9) onto one LCD Tube (P3) as shown in illustration # 1.
3.)Attach Left and Right Shelf Brackets (P6 & P7) to the Left and Right Legs (P1 & P2) using 4 screws
- as shown in illustration # 2.
Page 4 of 6
Text on page 5
4.) Insert 2 LCD Tubes (P3) into the Left and Right Legs (P1 & P2) as shown in illustration # 3.
5.) Attach Left and Right Legs (P1 & P2) to the Lower Cross Brace (P4) using 4 screws (A1) as shown in illustration # 3.
6.) Attach Stability Panel (P5) to the Left and Right Legs (P1 & P2) using 4 screws (A) as shown in illustration # 3.
7.) Attach Left and Right Shelf
Brackets (P-6 & P-7) to Wood Shelf (P-8) using 4 screws (A) as shown in illustration # 4. Do not tighten.
8.) Attach 2 Locking Casters (E) and 2 Casters (F) to the bottom of the Left Leg (P1) & Right Leg(P2) as shown in illustration # 4. Tighten Casters using Caster Wrench (H).
Page 5 of 6
Text on page 6
Hook the two TV Brackets (P10) on the Top and Bottom LCD Tubes(P3) as shown in illuatration #5. Connect each TV Bracket to the Collar (P9) on the top LCD Tube using two Screws (B).
10.) Secure TV Brackets at desired width by tightening Screws(A) using Allen Wrtench (G) as shown in illustration #6
WWW.MYBINDING.COM
Page 6 of 6 · End of manual
Quick start
- Read the instructions through first, then identify and separate all parts and hardware.
- Slide two collars (P9) onto one LCD tube (P3).
- Attach the left and right shelf brackets (P6, P7) to the left and right legs (P1, P2) with 4 screws.
- Insert the 2 LCD tubes into the legs, attach the legs to the lower cross brace (P4) with 4 screws (A1), and attach the stability panel (P5) with 4 screws (A).
- Attach the shelf brackets to the wood shelf (P-8) with 4 screws (A), without tightening.
- Fit 2 locking casters (E) and 2 casters (F) to the legs and tighten with the caster wrench (H).
- Hook the two TV brackets (P10) on the top and bottom LCD tubes, connect each to a collar with two screws (B), and tighten the screws (A) with the Allen wrench (G) at the width you need.
Frequently asked questions
How do I set the TV bracket width?
Hook the TV brackets on the LCD tubes, connect them to the collars on the top tube, then slide them to the desired width and tighten the screws with the Allen wrench (G). See page 6.
Does the cart have locking casters?
Yes. It uses 2 locking casters (E) and 2 standard casters (F), tightened with the caster wrench (H). See page 5.
