Page 1 of 4
Page 2 of 4
Page 3 of 4
Text on page 4
1.) Loosen the six Back Panel Screws (H) from Step #5 of the Elevation Mobile Stand (#27624) assembly instructions. See Illustration # 1. You may want to remove the Back Panel to make wiring easier or leave it in place for wire security.
Back Panel Optional
# 27624 Assembly
2.) Take the assembly from the end of Step #5 of the all Mount (#27648) and hook the four mount tabs that are on the back frame into the top four brackets that the Back Panel of # 27624 are hooked into. See Illustration # 2.
# 27648 Assembly
# 27624 Assembly
3.) Retighten the four top Back Panel Screws (H) to secure the two assemblies together.
WWW.MYBINDING.COM
Page 4 of 4 · End of manual
Quick start
- Complete the Elevation Mobile Stand (#27624) through Step 5 and the Wall Mount (#27648) through Step 5.
- Loosen the six Back Panel Screws (H) on the stand. You can remove the back panel for easier wiring or leave it on for wire security.
- Hook the four mount tabs on the wall mount's back frame into the top four brackets that hold the stand's back panel.
- Retighten the four top Back Panel Screws (H) to secure the two assemblies together.
