Page 1 of 3
Page 2 of 3
Text on page 3
1.) Loosen the six Back Panel Screws (H) from Step #5 of the Elevation Mobile Stand (P1) assembly instructions. See Illustration # 1. You may want to remove the Back Panel to make wiring easier or leave it in place for wire security.
Back Panel Optional
# 27624 Assembly
2.) Take the the Electric TV Wall Mount (P2) and hook the six mount tabs that are on the back frame into the six brackets on the Cart (P1). See Illustration # 2. .
3.) Retighten the six Back Panel Screws (H) to secure the two assemblies together.
WWW.MYBINDING.COM
Page 3 of 3 · End of manual
Quick start
- Loosen the six Back Panel Screws (H) from Step 5 of the Elevation Mobile Stand assembly. You can remove the back panel for easier wiring or leave it on for wire security.
- Hook the six mount tabs on the back frame of the Electric TV Wall Mount (P2) into the six brackets on the cart (P1).
- Retighten the six Back Panel Screws (H) to secure the two assemblies together.
