Page 1 of 6
Page 2 of 6
Text on page 3
27809 MediaSpace Flat Panel Cart
Non-Locking Caster 2 EA
Page 3 of 6
Text on page 4
Assembly Instructions
1. Attach two Locking Casters (F) to the bottom front of the Base (P1) using four Screws
(A) to secure each as shown. Attach two Non-Locking Casters (G) to the bottom back corners of the Base. Secure in place using four Screws (A) for each . Tighten the Screws with Allen Wrench (D). See illustration #1.
Longer Distance is the Front
- Lay the Body (P2) on the side and attach the Base (P1) usiging four Screws (C) as shown in illustration #2. Use Allen Wrench (E) to tighten Screws.
Page 4 of 6
Text on page 5
- Hook the Shelf (C) over the edge of the front bottom panel. Line up the holes on the back inside of the bottom panel and secure in place using two Screws (B). Tighten Screws using Allen Wrench (D). See illustration #3.
- Stand the unit up and attach the bottom Back Panel (P5) into the Keyhole slots in the Body’s frame. Repeat this Step to attach the top Back Panel (P4). See illustration #4
Page 5 of 6
Page 6 of 6 · End of manual
Quick start
- Attach two Locking Casters (F) to the bottom front of the Base (P1) and two Non-Locking Casters (G) to the back corners, using four Screws (A) per caster. The front is the side with the longer distance.
- Lay the Body (P2) on its side and attach the Base (P1) with four Screws (C), tightened with Allen Wrench (E).
- Hook the shelf over the edge of the front bottom panel and secure it with two Screws (B) through the back inside of the bottom panel.
- Stand the cart up and hang the bottom Back Panel (P5), then the top Back Panel (P4), in the keyhole slots in the body frame.
